NorCal spotted and BS Thread

This is unfortunately probably true. I can't fall any further behind. I still need the frac.

 

Sh** we should've done that last weekend.

 

I'll order it tomorrow. What camera should I get?

 

The kind without parking lines and isn’t backwards.

 

JP

 

This is the one @BlueBottle recommended me

NOAUKA Waterproof IP68 Night Vision 170 Degree Car Rear view/Reversing/Reverse Camera Universal Color CMOS Imaging Chip Backup Parking HD Front View C

$13 NOAUKA Waterproof IP68 Night Vision 170 Degree Car Rear View/Reversing/Reverse Camera Universal Color CCD high-Definition chip Backup Parking HD Front View Camera

https://www.amazon.com/dp/B06XNM7GNS?ref=yo_pop_ma_swf

 

That's the one I got too.

 

Thanks. Added to my cart.

 

I hope JP is paying attention here. @froggy78

 

Which do you guys prefer?
First one is alsd on , vcs off
Second is everything is off. No alsd.

This


Or

 

Everything off!!! And isn’t there one less button push if it’s in 4wd or 4low or something? Can’t remember right now, but what happens then?

 

^^^^^Ditto^^^^^

 

I'm with those guys.

 

No. To get to everything off, you push and hold for 3 seconds, let go and push and hold for another 3 seconds. No matter what drive mode you are at.

 

What happen with JP.. I want in on this.

 

I too am going to install this camera, how did you guys determine how far in/out to mount the camera on the pro grill? Do you have a recommended dimension?

 

@BlueBottle installed mine for me. For the most part it just looks centered in the grille.

 

ok, so even "front -back" within the grill? What I am wondering is, if it affects how the camera shows the distance of an object in relationship of the front end... if that make sense?

 

I’ve seen a few and some show the bumper on the screen and some don’t. I think they all had the same camera. If you want your bumper to show, put near middle, if you don’t, move it forward just a bit.

 

Ok, thanks Joon. Like all of my mods being done 2-3 times over, I think I will get wired up and hold it in place until I am happy with the view.

 

I would put a connection after the grille. Incase you need to take the grille off you can just disconnect. I have to add it now.

 

Drill as far forward as you can with your drill. It will make sense once your grill is off. Also make sure you have clearance for the threads/wires. There’s only one way to install it. You will see.

I placed the connector for the camera betweeen the grill and truck so if you have to remove the grill the connector is right there.

 

@Tundra4us

Not the best pics but should give you an idea



@joonbug whered you put this connector?

 

I forget. Gotta look.

 

Thanks, have to confirm schedule but am interested. Should know by end of the weekend.

 

Email sent for the FRAC and order placed on Amazon for the camera. I guess it is just a matter of time now. It is going to be nice to have, but I am not looking forward to doing the install.

 

flower order as well..?

 

I need to get busy calling landscapers!

 

yup! throw some orchids in there.

 

FRAC PartAY!