What have you done to your 2.5 gen Tundra today?

What Kind Of Bumper Do you have on your Truck with the winch??? That Is the Perfect Set up..Still looks Factory.

 

Got a bath and spray wax detail, nothing special.... Yearly Clay bar, seal, and wax coming soon before they start slinging salt and shit

 

I finally did it! Thanks @pbcolt for the sale and meeting me halfway down I-5! I can't wait to see how much more light the light bar will throw some the opening on this grille is larger. Plus I love her new look!

 

Right!?!?

The only bad thing about getting her all cleaned up is she won’t stay that way. I have to dust her daily, and bath her once per week at least. I love white but maybe MGM or some other color would have been better? NOPE, white is right, and the fastest color to boot.

 

My last Tundra was white, I've now graduated to MGM.

 

Thanks for the kind words sir!!

 

Replaced rear seat power with a double USB port. Keep the kids fully powered and happy.

 

where did you pick up this bad boy? should be the same for my tundra?


2011 CM 4X4 TRD RockWarrior

 

That is sexy....can I take your suspension on a date?

 

Your review pushed me too. Thanks alot (sarcastically)!!!

 

Didn't do anything but I did go to the Offroad Expo today. Stopped by theSDHQ booth and picked up the hood bulge Baja Designs LED bar mounting kit. And a jack extension.


Just have to figure out how to mount it properly.

 

She's nice and she puts out!

 

Fun in the sun at SLP

 

$14 from Amazon. Comes with either blue or red lighting. With a blue truck, I went with the blue of course. After removing the stock cig lighter, I did have to expand the remaining hold about 1/8", but once I did that it fit perfect.

$13 MICTUNING Dual USB Charger Socket 2.1A & 2.1A Power Outlet with Digital Voltmeter Blue LED Light 12-24V for Car Boat Marine Mobile

https://www.amazon.com/gp/product/B01M4OKBSB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

Thats cool. Do you have to remove the compartment to install this? How do you access the nut on the back?

 

Love Blue.

 

csuviper has a great write-up on how to do this all with pictures. I used a slightly different piece, and used a step-drill instead of a Dremel, but basically the same thing. I also didn't cut the wires and replace with female connectors. Instead, I wired up a short connector with female on one end and male on the other. Could then leave the stock alone in case I ever wanted it.

https://www.tundras.com/threads/diy-usb-replacement-cig-outlet-2nd-gen.11248/#post-193445

 

Starting a build thread to distract from the build is a great idea.

I hope it works better for you than it did for us....

https://www.tundras.com/threads/komodo-my-wifes-daily-driver.16989/

Full disclosure, the ‘build’ part of our story still resides on another Tundra forum until I can migrate it all over here.

I was worried about painting those pieces and it looking cheap afterwards. This actually looks awesome!

 

Thanks but how does that panel remove on a 3rd gen? He has a 2nd gen.

 

The back panel basically just lifts off. I open the consul and can lift enough with my fingers to get it to start to pull. You can also use a plastic prying tool. Close the lid and then lift the panel up and slightly back. It'll come right off. Putting on is just as easy. line up and give it a bit of press down and it locks in place.

 

Put on my first forum decal ever.

 

I would get one but it’s a Gen 2 truck profile

 

Ohh don't worry, I'm guessing knowing myself it won't be too long before I pull another trigger. I'm going in with good intentions though, lol.

 

So I'm pissed. I ordered everything from quadratech since they in PA and thought I'd have it all for use yesterday. I got my daystar d ring isolators and the smittybuilt winch accessories bag with everything in it. But when it came to getting my factor 55 prolink and paying for it all as u can see here...
For some reason I ended up getting this instead.
I'm still trying to figure out how a ford/GM high performance thermostat is going to be of any use to me in place of the prolink, any use at all for that matter since I'm smart enough to only own Toyotas. I called them yesterday to express my dissapointment since I was planning to use the prolink yesterday while winching. I was told the products are next to eachother in the warehouse and I'll get my prolink on Tues since there was no other option to get out quicker to me and no manager there to speak to on Sat. Guess we'll see if they call me to make right tomorrow or if I must call and complain more to a manager. If I get some kind of credit toward my order I will forgive and forget the mixup and write it off to people not being perfect. If I get told to poss into the wind it will be my last order from them. Guess we'll see if they are willing to make right tomorrow.

 

Sometimes the little things make a big difference. Huge shout out to @Achuop for making my floor mats bad ass with some logo inserts!! Gave me 10 more HP too, haha! Also installed the McGuard tailgate lock and the tailgate pop and lock. Great investments for some peace of mind. Gave her a bath too. Damn these things look good all cleaned up!!

 

Pulled off the sticky back and stuck on a blindspot mirror, Pepboys had them for a dollar works great and within my skill range

 

LEDs for every bulb on the truck.. if you haven't done this yet, I highly recommend it.

Heads/Fog light bulbs: PlashLights 6000k Pure White (lifetime warranty)

Interior/Tails/LP/3rd Brake light bulbs: Sylvania 6000k Cool White (lifetime warranty)

 

Can't wait to read that review

 

My $45.00 mod today. Lighted blue sills on all 4 doors.
Before I forget which ground wire to tap into.

Driver side front (light blue)
Driver side rear (black)
Passenger side front (brown)
Passenger side rear (green)

 

Cool coolhardy I like it, nice job