What have you done to your 2.5 gen Tundra today?

Yeah

I experimented with the letters to see how hard they would be to get of. Probably going to take a little heat. Mine are stuck down pretty good.

 

You cleaned your K&N with beer?

 

Probably the only good use for it. Beer for amateures , whiskey for pros .

 

I've taken a break at the Iberville Parrish visitors center numerous times. The memory that is at the top, though, is the time, before cell phones were really a thing, that my buddy lost his Travelall's right-rear wheel driving 70 about midway across the bridge. He'd been bragging most of the trip about his DIY tire rotation. Anyway, the wheel passed us before he could pull-over, took two bounces, and hopped over the guardrail. While he walked down to the nearest call-box to summon assistance, I stood by the rail and watched the wheel slowly float off and disappear amongst the trees.

 

+1 great mat, have one in my truck and nabbed it on sale for $100 off.

 

Happy Memorial Day all.

New boards! GoRhino Dominator D6, got Line-X coated and got them put on Sunday.

Shout out to @RustyShackle323 and @Quicksand_Tundra for their help and recommendations.

 

Looks great!!!

 

Been working in Nevada for the past month, and decided to take a trip to Lake Tahoe for memorial weekend.

 

My tailgate has been rattling and it sounds like the truck is falling apart when I hit a bump in the road, which Louisiana has more of than smooth road. I was checking the rubber cushions for the tailgate and one of them broke. So.. here's my temporary solution until I can get new ones. Shoved some socks in the hole and no more rattle.

 

I like those! I have dogs that aren’t fans of the stock running boards. These look a bit more accommodating for them.

 

Quick and simple today, Vleds licence plate lights

 

Nice - I like temporary fixes like this. I'll need to remember it.

 

I’ll happily admit I’m not a pro when it comes to drinking.

 

I may have to do that for awhile myself!

 

My post was more about an experienced pallette.

But it's alright rookie, you'll get there.

 

Picked up fallen limbs from Spring storms prior to brush-hogging the pasture:

 

Time for some spring helpers:

 

Drove 10 hours up north to the North Maine Wood to vent out and back. Remarkable moments were forcing a sudden beaver pond instead of a charted Wilderness road in DeLorme atlas.



This was the first time I went that deep.



Engine fan was cutting thru the water, the truck was sinking in mud if let stay for longer than a second. Water drained from the doors when I finally got the the other side of the beaver dam. I was happy I made it, only to find out in a minute the old road is blocked.



Didn't want risking going back to beavers, so decided to go through the forest fully harvested long ago.



With only 1-1.5" of lift and 33" AT tires I knew I would be stuck immediately, so I prepared the toughest looking stump with chainsaw, so recovery strap would not slip over and I could pull in with the winch. A group of 4 vehicles stopped by and I got filmed of course =) Made it half way through, then one gentlemen suggested to use his truck as anchor, so I could do the other half. That did that, I thanked him with couple of the finest cold beers, which I had plentiful, thanks to my ARB fridge setup =)



Speaking about beer... Because it's end of May, the bugs are there, I had to gear up for the beer



One of the old routes I tried to explore ended up pretty bad for the truck: the last mile or so was all bushes and shrubs. Old map said there's a bridge at the end, and I was so close, so I decided to push through. Only to find out the bridge long gone. Of course.

Scratched all the way back, doubling the damage. Parked the truck, returned to the water on feet for some bathing. Water was good, maybe high 40s.



The truck is a little bit more brush-polished than it was the day before. But it'll buff out



I also loved my Rago dash mount plate. Took an old Android tablet, loaded it with Earthmate, and it was a great help in navigating to troubles!



Anyways, it was a remarkably good trip, and I'm ready for my dull civil life, till the next trip!

 

flattened my license plate back out and flipped around the fairlead mount (though it really doesn't work in this position either with the Agency6 block). And this position is even more susceptible to damage that the original position. So I need to find a different solution (front plate required in WA).

And swapped out the two outer lenses on my S8 with amber.

 

Do what I did? I have a similar semi-hidden WARN bumper, only w/o a neck breaker.

 

$72 Fishbone Offroad Hawse Fairlead License Plate Mount - FB21098

https://www.4wheelparts.com/p/fishb...fijoOKqNbuyFK_mDuagHQNxMjqziFB3EaAhucEALw_wcB

Watch the video.

 

Does not work for pushing through the bushes.

 

Except that would either cover the front of the grill or the front of the light bar…

That’s basically what I’ve got - slightly different design. What I need to do is just extend the tabs to push it forward enough to clear the shackle block and flip it back the way it’s supposed to be. I also want to dream up a quick disconnect for it, so I can just pull it off out in the woods

 

Went out and played for a bit. Had to show these SxS’s how to hit the big whoops. It’s always fun outrunning the turbo SxS’s

 

Like this?

Smittybilt Roller Fairlead Mounted License Plate Bracket - 4432

$39 Smittybilt Roller Fairlead Mounted License Plate Bracket - 4432

https://www.amazon.com/dp/B004XG3R3O

 

Is that what they’re calling Gen 3’s now?

 

That clips onto roller fairleads… I’ve got a Hawse fairlead.
But thanks for looking!

might just go this route to start - simple, but also easily hit.

$25 Rough Country Winch Fairlead License Plate Mount| Hawse Fairlead - RS138,Black

https://www.amazon.com/dp/B07QYCKZQ8

or things one is more complex, but also clears the fairlead opening better if pulling upward

$50 KMFCDAE Hawse Fairlead License Plate Mount Winch License Plate Holder for US Standard Size License Plate - 10" Winch Mount

https://www.amazon.com/dp/B09GYBJHR4

 

Hhaha well played sir

 

Should also add “Outrunning Gen 3s” lol