Wheel recommendation please (King 2.5 co, Icon billet, 35" tire, NO BMC)

I'm ready to lift the truck, placing the order next weekend. Still can't figure out which wheel will work best (i.e. no BMC) with the following setup, I'll appreciate your input:

• King 2.5 Coilover/shocks
• Icon Billet UCA
• Coachbuilder tie rod ends
• CBI Offroad Baja front bumper
• 35x12.50R17 tires (also open to 35x12.50R18)

I'm fine with removing the mud flaps but really want to avoid BMC. So far everything I read seem to suggest 17x8.5" w/ 5.75” Backspace / 25mm Offset wheel should work with this setup w/o BMC. Can anyone attest to that? Please and thank you.

 

I did method 701s in 18.

I do however have a bmc and 35x1250s

 

method 701 in bronze White tundra. +25 r18 or any of the trail series.

 

Agree ^ this is my buddies truck with my old king setup with total chaos upper control arm.

 

My suggestion is a 8.5” to 9” wide wheel, with +25 to +35mm offset.
You’ve got lots of room behind that bumper, so slide the tires forward by having your caster set at 5° or a hair over.

Should even drive nice!

 

SCS F5 in 18"