1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Air Suspension stuck - Airbags completely inflated

Discussion in 'Sequoia Builds' started by Toyota_Sequoia, May 2, 2023.

  1. May 2, 2023 at 5:41 AM
    #1
    Toyota_Sequoia

    Toyota_Sequoia [OP] New Member

    Joined:
    Jul 3, 2022
    Member:
    #80226
    Messages:
    2
    Hey Guys,

    Needed some quick advice!
    Passenger side position height sensor had broken bracket so got the entire assembly replaced including the link arm. The next day the rear started to raise (ride height level I guess) but this time it was so high that the front is in nose dive position. Very odd. Has never happened before. If I try to lower its using the height select button the Lo indicator would start blinking (normal) but won’t lower, instead the indicator will go back to Normal mode and the pump would kick in. As I tried this several times, the rear air bags are completely filled and would not lower. The vehicle is stuck at home. Need urgent HELP pls!! Have tried manual mode but nothing. The rear end (height diff bw the vehicle and the tire) is about 12”-15”higher versus 4-5” which is very concerning. The airbags seems to be fully inflated.

    Is it something to do with the height sensor alignment?
     

Products Discussed in

To Top