What have you done to your 2.5 gen Tundra today?

Is the power tailgate lock compatible for a 2015 Tundra? If so, can you provide the Toyota part number please? Thanks in advance!

 

Are you referring to the Pop And Lock kit?
Pop & Lock PL8547HD Power Tailgate Lock Fits Tacoma/Tundra, Black

$138 POPNLOCK LLC Pop & Lock PL8547HD Power Tailgate Lock Fits Tacoma/Tundra, Black

https://www.amazon.com/dp/B08F2XJYV3

 

I'm gonna go to a Platinum grille once my 1794 chrome gets beat up enough by rock chips. Looks good!

 

Niiice work! What panel did you use over the fuse?

Do you have plans for the blanks on the SP Panel? That's the only thing holding me up is because I don't know what to do with all of the extras, LOL.

 

Love the SmartCap, can't wait until they do their next run in Aug so I can order! How was the build and install? Did you do it yourself? Did you order direct from them?

 

Replaced my PCV valve. Anyone else done this? Not as simple as the online videos.

 

I. Need. 37s or 38s. Bad.

 

Yeah that’s all that matter they get delivered. Yes Vin does a awesome job packing them. I have had 3 sets and now my fourth set the F5’s going on in the spring. Not once ever had a issue with any of them.

 

That looks amazing!! Nicely done!
I have the same spacers. Just waiting for the weather to warm up to slap them on...

 

You can't see in there very well, and it's pretty tight if I recall.


Twss.

 

Raptor lights .

Used these from Amazon.
Raryloy Led Grilles Marker Amber...

$26 Raryloy Led Grilles Marker Amber Light for Ford 2004-2019 F150 F250 F350 and 2013-2018 Ram 1500 Smoked Shell for Trucks 4pcs

https://www.amazon.com/dp/B0B4RBN1YM?ref=ppx_pop_mob_ap_share

 

Very nice!

 

The 2x8 just slips in. When I have to use the whole bed I just lift it out and either lay it on it's side of leave it outside the truck. The plywood is there so when it rains the little bit of water that sneaks in doesn't get my hunting gear wet. I had to hunt with a frozen jacket one time, it wasn't good.

 

Wasn’t sure if there was a factory option for this or to go aftermarket. As long as it’s functional, I’m happy either way. Thank you for the link

 

The kit I used was Toyota Part Number

$240 PK3B6-34JS0 Genuine Toyota 2019 & Up Tundra Power Tailgate Lock Kit Standard Wheelbase PK3B6-34JS0

PK3B6-34JS0, which shows it's for the 2019, 2020 and 2021 trucks. I'm not sure of the part number for the years before that. Perhaps someone on here has that part number handy? I'll do a quick search and see if I can find it for you.

Cheers!

 

Same part number for a 2018 as well. Just completed a few weeks ago. Very easy install. Worst part was removing the cat plate to gain access.

 

It was a pain in the ass, but it’s in. Evil Manufacturing 3rd brake light.

Thanks @reywcms for the guidance!

The hardest part was scraping away all of the OEM gasket with no nails.

 

I’m about to take on the same project myself. My S2s just came in today. How is the output at night?

 

I found one in stock locally. The install was $300 (USD) and I didn't have anyone around to help with the install, so I went that route. In reading the instructions and looking at the cap now that I have it, I don't think it's a difficult job. You you just need someone, or a lift, to get it on the truck.
Next up is figuring out the interior. I need some sort of organizational structure for my tools and whatnot. Then lighting. I'd like to do some LED strip lighting in the roof and doors.

 

Just a tip. I had great luck in removing all the leftover bits, with a lil bit of heat from heat gun and “pink pearl” school eraser.

-JS

 

Drove mine to work and back home…

 

Finished up installing a new dashcam. Thinkware F200 Pro. It’s a nice upgrade from the Amazon speshul I’ve been running.

 

They’re sufficient for me since they’ll be chase/blind the tailgater lights, lol. But they are good!

 

I’ll be using them for the same reasons

 

For me, was a plastic trim tool and some goo-gone. Cleaned it up real good, then wiped down with isopropyl alcohol.

 

Hahaha! Did you get the mount yet?

 

Looks good. I love mine.

Did you use nutserts?

I scraped my old gasket using Goo Gone/Goof Off (off-brand that I feel is much better) and a plastic razor.

 

Yeah, I ordered it for myself as a early Christmas present.

 

Yup, they provided nutserts (10-24). Used a 19/64 drill bit to drill the holes after centering the mount to to shark fin.

Going to swap the Allen bolts with arp 12pts.

 

Blue and yellow are brake lights, black is ground, white is cargo.

Get yourself some 10mm magnet sockets, set of plastic trim tools, trim clips (you’re gonna lose some once you pop off the c-pillar panels), a magnet extendable pole, and a 6pk.