Rear view mirror upgrade?

nope where the sunglass holder is , one side has tabbed pins (front if i remember correct) rear has two stationary tabs that go under headliner. You'll see it clipped alone by itself not connected.

 

Sorry a little off topic. Just looked at my spec sheet and I see no mention of homelink. Does "digital rearview mirror" imply that?

 

There are 3 different rearview mirrors in the Gen3 Tundra.

Regular rearview
Homelink rearview
Homelink on Digital rearview (with SPA)

 

@Spdfreak91 The GR 86 mirror you installed seems pretty similar to the Gentex one I was looking at, but better price. I think I'll go that route.
My only question now, is that mirror a smaller width than the OEM Tundra mirror? Since the GR 86 is a small car, I don't want my mirror to be smaller than the current one, which is barely wide enough.

 

I thought it may have been as well but the frameless GR 86 mirror is just a tad bigger than the mechanical dimming one that was in there I THINK, I also included the wiring diagram from MEMORY, so make sure you check your wiring before attempting this, and if not people do sell the wiring with connectors already on, this was just my way to save a buck and make it work.

 

Awesome. I appreciate your help!

 

they also make a battery powered Homelink mirror " PT374-00210 Toyota Frameless Homelink Rear View Mirror . If thats all you want and dont want to mess with wiring.

 

@Spdfreak91
I got this far and soldered the wires, now I just need to put the pins back in the black connector that connects to the trucks upper console harness. Do you remember which of these four wires from the actual mirror is 12v key, constant, and ground?

 

I used this diagram from the Interwebz
https://www.pinterest.com/pin/gentex-gntx313-wiring-pinout-unique--610941505696547364/

 

Nice! Thank you!

 

If anyone is looking for a auto dim, homelike and compass mirror I have a couple I plan on selling. I ordered three of these because I got them at a very good price. I would sell them for $100 each shipped to the continental US. I'll post more pictures if there is an interest.

 

@Spdfreak91
Did you even connect the grey wire from the mirror to anything?
I’m assuming green and white are together to constant power, black is ground, and grey is ignition power?

 

yeah, that way the homelink only works when the truck is on

 

@colekbod @Spdfreak91

Is this correct? I’m trying to follow along and this is what I ended up with:

3 pin mini harness from mirror to 5 pin tundra optional/cam plug. I have green and white to 12v, gray to key, and black to ground?

Thanks!

 

@jkk001 I have green and white to ignition power, black to ground, and I didn't connect gray at all. Mirror works great and only when the ignition is on.

 

Thank you, yea I thought it wasn’t correct when I was able to use homelink with car off. Thanks for the clarification and more info for future reference.

 

If anyone is wonder if the OEM frameless mirror with homelink (part number: PT374-00210) works, it does! Even though the Toyota website states that it doesn't fit the 2022+ Tundras it actually does. It's a little bit bigger than the basic mirror too. The buttons are located underneath. I got it from the parts.toyota.com site for $129.

 

thats weird. my 2014 4runner you can use the homelink button w/o vehicle being on from the factory. i ususally push the door open before i even push the PTS button..

 

Was that part number plug and play, or did you have to perform a little electrical sorcery as well?

 

I'm running that mirror in my Tundra as well. It's battery powered, so no wiring necessary. They say the battery should last 10-15 years. Range on home link is great, looks so much better than the factory mirror. All positives in my mind!

 

Very nice!! I think I’ll be pulling the trigger on this sooner than later. Thanks for blazing the trail, Dustin!

 

I think you'll be very happy with it for the price and ease of installation!

 

I think I will be too. I don’t like a lot of unnecessary clutter, so I’m excited to be able to get rid of my normal garage door opener from the visor.

 

Man - I love my camera rear view - i use it all the time (unless my back window is down, in which case the reflection makes it hard to see)

 

Just got one of these for Christmas and not able to get my mirror and the OEM dash cam working simultaneously. I used their option of (have 5 pin connector and it’s occupied) so they included a jumper harness but only the mirror powers on and works and now the dash came doesn’t.
Sent an email to the company to see if this is known or what happened but just as an FYi if anyone goes down this route.

Looks like it was pinned out correctly so wondering what went wrong but hasn’t been my week for electrical stuff and the truck lol