2022 tundra SR fog light add-on

I'm adding factory fog lights to my 2022 tundra SR. I have been unable to find a factory plug on the truck for them. Can someone that has a factory fog light truck post a picture of the fog light wiring just behind the grille/front bumper? Before I install a relay and switch I'd like to confirm if my truck has the factory wiring for it. Thanks for the help!

 

I have the same problem, I want to connect the fog lights to my SR.
did you find a solution?

 

There is no harness or switch for them. I do have a factory set of fog lights as well as a set of new pigtails plugs that can be used to wire them up to a switch with a relay. Should be easy to do. I sold my truck before installing them.

 

Anyone figure this out yet? This is one of the biggest hangups for me when considering an SR vs SR5

 

I would like to know this as well. Have you seen the Heretic fog light upgrade kits people put in. I believe it comes with a wire harness and switch for SR owners. They come in white or amber. I like the look of white but as I understand amber is more functional in rain snow and fog.

https://www.hereticstudio.com/produ...fog-light-kit-series-3?variant=42652102131931

 

Researching now as I'm getting ready to get into this aswell, waiting for parts to arrive.

 

@TrailKiller were you able to get these fog lights installed?

 

That looks good. Mounting a switch and running some wire is an easy task.

Brad

 

Fantastic news!!! This was one of the major sticking points for me with the SR.

Now, to get a power seat in the SR....

 

I bought another 2024 tundra sr 4x4. I have a set of factory lights and harness. I will run a factory switch in one of the blanks on the left side of steering column. I will try to run a wire inside factory loom to a blank fuse in the fuse box. Does anyone know if the factory fog lights on factory trucks are wired through a relay or Just fused direct circuit?

 

The factory fog light switch is on the head light stalk. If it’s like the gen2, the wiring was there just had to install the relay, lights and headlight stalk. Don’t hold me to that though, you would need to inspect your harness at the stalk and compare it to a wiring diagram to see if your has to wires there. You may also be able to add the light sensor and give you automatic headlights too since the stalk will also have the auto function.