WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Installed some @cbioffroad ditch light brackets.

 

did you have the mirror caps painted?
Looks legit.

 

The fronts look good.
I have a rear ultra neo from NW as well and it’s held out well this winter with kids and dogs.

 

New shoes

 

Hey thanks @Front_Range_Pro . Yes I had local shop do it. Had an idea to make unique, and they accomplished it.

 

Door lights with the logo.

LED Car Door Light Projector...

$27 URSTOUD LED Car Door Light Projector Courtesy LED Laser Welcome Lights 3D Ghost Shadow Light Logo Lamps for Toyota Highlander/Camry/Prius/Sienna/Tundra/Venza/4 Runner Puddle Light Accessories (4 Pack)

https://www.amazon.com/dp/B08S47MQ76?ref=ppx_pop_mob_ap_share

 

just put on a couple of stickers this weekend.

before


after

 

Hey Front Range- how long does that matte wrap usually last (under normal use) - and what did your instal run. Looks great.

 

It’s an Xpel stealth wrap comes with a 10 year warranty.
I have already taken it out in trails and had some trees try and give pinstripes. They scratched the crap out of the door decals but the film held up perfectly. If you didn’t see the scratch the vinyl decal, you wouldn’t even know there was something that brushed the side.

Costs vary on shop and skill of installer. But they are like a good tattoo guy, if you find one that’s worth it, you’re gonna pay some cheddar.

Expect to pay $7k-$12k for a full wrap with ceramic coating (on top of wrap). I know it sounds like a lot but the paint and appearance are still flawless (except where there was an installation issue. I’m getting those fixed/warranties next month) and I already have 12k miles on it.

 

too bad they dont say tundra

 

Yes I wish they did.

 

you see this?

https://www.walmart.com/ip/2X-Drl-F...8?wmlspartner=wlpa&selectedSellerId=101126200

 

Maybe when someone comes out with some better fitting ones. I have seen someone install these and the fit was horrible.

 

i did find this projector on https://www.rpidesigns.com/shop/ite...4E0vetNR9M04G6Hh4ZICxEoYYZ6PShiWnzkJ8Ivc7FaBQ

 

Toyota HQ in Plano has a "Low Emissions Vehicle Only" spot right next to the door. Luckily my new truck is a hybrid!

 

Whenever I go to WholeFoods I park in one of their "For fuel efficient vehicles only" parking spot *each*and*every* time!
(I don't have a Hybrid)

Once in a while someone will stare...and I'm always ready for a middle of the parking lot debate.

-99

 

No pictures but put on the TRD skid plate on my Limited CM (non TRD) over the weekend. Kind of disappointed that Toyota does not put any skid plate on 4x4 as standard equipment

 

Finished my Rave offroad heritage grill install. I am happy with the looks but the quality was a little lacking. I had to drill out the camera hole and modify the camera bracket they sent since it didn't fit. Also don't like the amber lights at the top so I took them out.

While doing it I chose to plasti dip the mustache, and I'm happy but need to touch up spots that got it hit while mounting again.

Light bar doesn't offer much light but I prefer it to having the random opening there.

 

Sharp truck

 

Installed New wheels and tires…

 

I’ve got

Did you just tap into the existing lights in the footwell and door panel? My SR5 has no lights at all in those areas so I’m trying to figure out if I could wire this in without totally tearing stuff apart.

 

Today I added a solid 1/2" of ice to my hood and bumper ...

I was going to see how the 4x4 compared to my Sierra that I had during the 2021 icemagedon but decided against it.

We don't get this in Dallas very often. Thanks in advance for your understanding northerners.

 

Knowing what you know now, would you buy this heritage grill kit again? I was looking into it and I was concerned with how bright the light bar would be. Rave claims 4,000 likens.

 

I would probably still get the kit. I know just the grill is about 250 vs 450 with camera bracket, light bar, and marker lights. I do think the finish is better for some of the fine points on stock. Some of the screw holes are tight and the edges on the marker lights are rough.

The light output is brighter than the headlights and you can tell it is on but it's nothing to write home about. First picture is with light bar second without.

 

Wow. No kidding.
With all the peeps springing for the PRO front + that light bar I thought it would be at least somewhat "presentable," but that's all you get out of it?

Not disparaging anyone's choices, but only for example and comparison - here's what my "mid-range" $150 light bar can do:

Pic1 - low beams only


Pic2 - light bar only


Pic3 - high beams + light bar


Yeah, it renders all the other/OEM lights almost useless...
-99

 

Thanks for the insight!

 

Installed prinsu roof rack with baja designs linkables.

 

only the beginning...sliders on order, front, rear, kings soon!

 

Has anyone done a Go Rhino sports bar 2.0 with the pop up lights on a Gen3 yet? I’d be interested to see it and hear any issues you might have run into. Wondering if I can finally fulfill my childhood dream of having the modern equivalent of Marty Mcfly’s Toyota from Back to the Future. Lol