1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bolt in On Board Air Compressor Mount

Discussion in '2.5 Gen Tundras (2014-2021)' started by Bannock452, Apr 6, 2018.

  1. Aug 27, 2021 at 10:11 PM
    #481
    Trooper_TRD

    Trooper_TRD New Member

    Joined:
    Aug 24, 2021
    Member:
    #67214
    Messages:
    5
    Gender:
    Male
    Where can I purchase this? I have a 3rd gen, dual compressor with manifold. The bracket will hold the manifold too, correct?
     
  2. Aug 28, 2021 at 6:19 AM
    #482
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Yes the manifold will fit right on the front side of this mount. Here is a photo of the manifold attached below.
    D792BE59-6C60-4C62-88E0-7D8C9E88B1D2.jpg

    Secondly I am currently SOLD OUT of my mounts at the moment. Production is taking a bit longer than normal with everything going on. I will have a new batch of mounts in about 5 weeks as of now. Hopefully sooner!
    I will add you to my list and I can contact you once the shipment of new mounts has arrived to see if your still interested! Thank you!
     
    Skew12 and jc153 like this.
  3. Sep 28, 2021 at 12:40 PM
    #483
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Fresh new batch of Compressor mounts are IN STOCK and ready to ship. Thanks for your patience!
    D9BE5A6E-0033-4E69-BE73-4784EA56C2FF.jpg
    9BC23BA6-FD1B-419C-8313-BF246ECC8D8E.jpg
     
  4. Nov 29, 2021 at 2:59 PM
    #484
    Squatting Pigeon

    Squatting Pigeon Squattingpigeon.com Staff Member

    Joined:
    Apr 14, 2018
    Member:
    #14443
    Messages:
    56,120
    Gender:
    Male
    First Name:
    Holden
    North Texas
    Vehicle:
    GR Corolla
    Did anyone ever find out if the smittybilt compressor will fit?
     
    pandapro and Drainbung like this.
  5. Nov 29, 2021 at 3:04 PM
    #485
    Drainbung

    Drainbung Some days you are the show...

    Joined:
    Oct 30, 2020
    Member:
    #54270
    Messages:
    275
    Gender:
    Male
    First Name:
    Bob
    Oasis of NV
    Vehicle:
    2019 Cement DCLB 4X4
    TRD Fleshlight
    badmotofing3r likes this.
  6. Nov 30, 2021 at 8:38 PM
    #486
    Freedomfingers

    Freedomfingers New Member

    Joined:
    Oct 12, 2021
    Member:
    #69234
    Messages:
    9
    Gender:
    Male
    First Name:
    Travis
    New York
    Vehicle:
    2021 Army Green Tundra limited
    Mbrp car back exhaust
    How do i get one of these brackets?
     
    Bannock452[OP] likes this.
  7. Nov 30, 2021 at 9:09 PM
    #487
    Drainbung

    Drainbung Some days you are the show...

    Joined:
    Oct 30, 2020
    Member:
    #54270
    Messages:
    275
    Gender:
    Male
    First Name:
    Bob
    Oasis of NV
    Vehicle:
    2019 Cement DCLB 4X4
    TRD Fleshlight
    Send the OP a PM (click on his Name and then click start a conversation) and he'll get back to you.
     
  8. Dec 1, 2021 at 9:25 AM
    #488
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Thank you Bob! I’ve also just got my website up and running. BannockBuilt. I’m having a HOLIDAY SALE right now. Can use discount code BB30 for $30 off Compressor mounts. Thank you everyone for the support!
    Please feel free to send me a PM with any questions.
     
  9. Dec 1, 2021 at 8:11 PM
    #489
    Freedomfingers

    Freedomfingers New Member

    Joined:
    Oct 12, 2021
    Member:
    #69234
    Messages:
    9
    Gender:
    Male
    First Name:
    Travis
    New York
    Vehicle:
    2021 Army Green Tundra limited
    Mbrp car back exhaust
  10. Dec 31, 2021 at 4:24 PM
    #490
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    Hey folks, so I received my dual compressor, and I received my Bannock mount. Now I am waiting on a long hose because I want to route an air hose to a second hookup on my rear bumper. Does anyone make some sort of adapter/mount that I can use by just drilling a hole in the stock rear bumper (or near it)? I'm looking for something that is not very noticeable, not something bulky like the ARB remote kit that I see lots of people selling. I'd like to find something closer to this but I really think the rear bumper would be an ideal location. It can't stick out where someone will step in it though. Any advice would be greatly appreciated.
     
    Drainbung likes this.
  11. Dec 31, 2021 at 4:31 PM
    #491
    Drainbung

    Drainbung Some days you are the show...

    Joined:
    Oct 30, 2020
    Member:
    #54270
    Messages:
    275
    Gender:
    Male
    First Name:
    Bob
    Oasis of NV
    Vehicle:
    2019 Cement DCLB 4X4
    TRD Fleshlight
    Tons of info in this thread from Tacoma World.

    https://www.tacomaworld.com/threads/oba-on-board-air-mega-thread-bs.299523/
     
    BLONGTX[QUOTED] likes this.
  12. Dec 31, 2021 at 4:33 PM
    #492
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    That's perfect thanks Drainbung!
     
    Drainbung likes this.
  13. Dec 31, 2021 at 5:15 PM
    #493
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    So, i'm reading that I may need to cool the air off so it doesn't melt my hoses. I wasn't planning to install a tank, should I buy the ARB manifold kit, or a small tank, or just yolo it?
     
  14. Dec 31, 2021 at 5:20 PM
    #494
    Drainbung

    Drainbung Some days you are the show...

    Joined:
    Oct 30, 2020
    Member:
    #54270
    Messages:
    275
    Gender:
    Male
    First Name:
    Bob
    Oasis of NV
    Vehicle:
    2019 Cement DCLB 4X4
    TRD Fleshlight
    I'm running an ARB Single on my Tacoma which comes with the manifold and that lil bastid gets hot. I'm sure if you took the time to run the hoses away from the compressor you'd be fine. You can always add the manifold later if it blows a line.
     
  15. Dec 31, 2021 at 10:57 PM
    #495
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    I would rather pay a bit now than having a failure in the field. Do you reckon a manifold will fix the heat issue or do you think I should add a tank?
     
  16. Dec 31, 2021 at 11:37 PM
    #496
    BayRunner

    BayRunner I’m here, except when I’m not

    Joined:
    Sep 7, 2017
    Member:
    #9507
    Messages:
    2,534
    Gender:
    Male
    Vehicle:
    2017 Tundra Platinum
    I made my own bracket that mounts to the rear fender support.

    63590803-26E9-47E9-B5EB-B84E1BEBA2E0.jpg
     
  17. Jan 8, 2022 at 6:03 PM
    #497
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    I went ahead and added the manifold then an 18" braided leader line between the manifold and the first hose coupling so hopefully this will cool things enough to not melt the air hose. I'm a bit surprised on how difficult it was to install the bannock mount, none of the bolt holes lined up, the arm bends didn't line up with the firewall, and the arms seemed to be the wrong length by over 1/2". I know he said we'd have to bend the arms a bit to get it to fit, I just had to bend things much more than expected. I assumed it would take me about 30 minutes just to install just the mount and it took well over two hours. Maybe the dimensions of my truck are a little different than everyone elses. Nevertheless I finally got it on, I'll work on the wiring tomorrow if the Cowboys don't make me drink too much tonight.
     
    Drainbung[QUOTED] likes this.
  18. Jan 8, 2022 at 8:08 PM
    #498
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    Bayrunner, btw I like your mount, I couldn’t make something as nice as that but I also have a concern about breaking it when off-road. I decided to do a bulkhead out of the rear bumper instead.
     
    Drainbung likes this.
  19. Jan 16, 2022 at 6:47 PM
    #499
    TampaRD Pro

    TampaRD Pro Cunning Linguist

    Joined:
    Dec 23, 2019
    Member:
    #40248
    Messages:
    417
    Gender:
    Male
    First Name:
    Stanley
    Vehicle:
    2020 MGM CM TRD Pro
    Lots.
    How about something like this one I mounted on my rear bumper? Not very obtrusive and pretty robust, don't think you would step on it and break it off.

    Bumper 2.jpg

    pIC 6A.jpg
     
    Drainbung likes this.
  20. Jan 16, 2022 at 6:52 PM
    #500
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4

    That’s exactly what I ended up doing, I used the ARB quick connection though. Looks good
     
  21. Jan 17, 2022 at 12:42 PM
    #501
    clarkritchie

    clarkritchie New Member

    Joined:
    Sep 13, 2020
    Member:
    #52192
    Messages:
    363
    Has Florida done away with letters and numbers on license plates? That graphic sort of looks like a handgun with giant testicles.
     
    reywcms and pvn.beluga like this.
  22. Jan 17, 2022 at 12:54 PM
    #502
    badmotofing3r

    badmotofing3r To be so civilized, one must tell civil lies

    Joined:
    Oct 31, 2020
    Member:
    #54296
    Messages:
    259
    Gender:
    Male
    First Name:
    Zach
    Wyoming
    Vehicle:
    Hot Tamale
    Toytec lift and the works
    Did he just edit it so we can't see his number?
     
    TampaRD Pro likes this.
  23. Jan 17, 2022 at 3:53 PM
    #503
    TampaRD Pro

    TampaRD Pro Cunning Linguist

    Joined:
    Dec 23, 2019
    Member:
    #40248
    Messages:
    417
    Gender:
    Male
    First Name:
    Stanley
    Vehicle:
    2020 MGM CM TRD Pro
    Lots.
    Bingo! You got it! That's my vanity plate avatar "handgun with giant testicles".

    Duh.
     
  24. Jan 17, 2022 at 4:28 PM
    #504
    badmotofing3r

    badmotofing3r To be so civilized, one must tell civil lies

    Joined:
    Oct 31, 2020
    Member:
    #54296
    Messages:
    259
    Gender:
    Male
    First Name:
    Zach
    Wyoming
    Vehicle:
    Hot Tamale
    Toytec lift and the works
     
    TampaRD Pro[QUOTED] likes this.
  25. Jan 22, 2022 at 7:33 PM
    #505
    BLONGTX

    BLONGTX New Member

    Joined:
    May 20, 2020
    Member:
    #46838
    Messages:
    77
    SAN ANTONIO
    Vehicle:
    2019 Crewmax 4x4
    I finally got my last hoses installed and tested - no leaks, Loctite 545 is amazing.
     
    Drainbung likes this.
  26. May 10, 2022 at 1:17 PM
    #506
    odin1701

    odin1701 New Member

    Joined:
    Jan 18, 2022
    Member:
    #73319
    Messages:
    125
    Gender:
    Male
    Vehicle:
    2021 Tundra LTD TRD OR MGM
    Got one of these second hand, and got my twin air mounted! Man what a pain that back right hand bolt is lol.

    I hope that none of the relays in that box under the compressor ever die! :rofl:

    NOTE: The instructions that I got say to remove the whole air box. This is not necessary. You just need to pull the top half and take the air filter out. You can totally get to everything with the lower half still bolted down, you just need a wobble adapter and socket extension.
     
    Bannock452[OP] and Drainbung like this.
  27. Jan 13, 2023 at 9:27 AM
    #507
    Marvthehamster

    Marvthehamster New Member

    Joined:
    May 4, 2020
    Member:
    #45907
    Messages:
    332
    Gender:
    Male
    CO
    Vehicle:
    2018 CM
    ADS/Deaver, Method's, 35's, RCI sliders
    I just got one of Bannock's brackets to mount an ARB twin. Bracket is great, very nice piece of gear! One of my sons (3 years old) helped me install and had a great time last weekend with me under the hood getting it mounted. I still need to wire it up and plumb air lines.

    Couple tips on installing the Bannock bracket and the dual compressor others may find useful: Install the compressor onto the bracket before mounting the bracket to the truck. I thought the most efficient way to to do this is to connect the compressor to the bracket with one bolt only until you get the bracket solidly mounted. I installed the bolt in the slot closest to the firewall on the passenger side of the bracket. This allows you to install the bracket and compressor as a combined unit (much easier than separate) but still allows you to swivel the compressor for reaching the backside of the compressor and connecting the wiring harnesses. Once the bracket is mounted to the truck and you connect the harnesses, you can get the remaining 3 bolts started from the underside of the bracket and tightened without too much trouble. The idea of trying to connect those harnesses before mounting the whole thing seemed problematic and trying to get all 4 of those bolts started and torqued from the underside of the bracket after it's in place seemed like a hard way to go, as well. I didnt get any sort of install manual from Bannock so that's what I came up with. They may recommend something similar, I dunno?

    Can't wait to wire it up and plumb the air lines!
     
    Bannock452[OP] and Drainbung like this.
  28. Jan 14, 2023 at 5:24 PM
    #508
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Thank you for the nice write up of your install!
    First I apologize for forgetting the install instructions in your box. I normaly send that with each mount but I must have missed that one. So sorry for that! I plan to add the install instructions to my website so people can reference back online a little easier than paper. Hopefully that will help everyone when doing the challenging install.
    Thanks again for the support and I still have plenty of mounts in stock and ready to ship!
     
    Drainbung likes this.
  29. Jan 16, 2023 at 11:43 AM
    #509
    Marvthehamster

    Marvthehamster New Member

    Joined:
    May 4, 2020
    Member:
    #45907
    Messages:
    332
    Gender:
    Male
    CO
    Vehicle:
    2018 CM
    ADS/Deaver, Method's, 35's, RCI sliders
    It was no big deal on the install instructions, no worries! Great mount. Only thing I would suggest is you could remove about an inch worth of material from the "lip" on the passenger's side, front corner on the mount. This would allow you to get a box wrench on that mounting bolt and get a full range of motion without having to tighten it like and 1/8 turn at a time. Not sure if that makes sense but it's nitpick anyway. You make a solid mount that does it's job well so you probably have a reason that material is there anyway. Thanks for the support!

    Over the weekend I had to pull the whole thing out so I could properly install the air fittings on the compressor. I needed to pop that metal cover off the compressor unit so I could attach a 90 degree swivel directly into the unit. The wrench flats on that 90 fitting end up below the metal cover on the compressor once you start threading it in so in order to tighten properly, I had to uninstall and reinstall the whole mount and compressor again. Doh!

    Honestly it wasn't that big of a deal and I reinstalled the mount and compressor the way I described in my previous post. Took me about half the time as the first go around. I feel intimately familiar with the mounting/install now :)
     
    RainMan_PNW likes this.
  30. Feb 19, 2024 at 6:36 PM
    #510
    phonebooth

    phonebooth New Member

    Joined:
    Jul 27, 2019
    Member:
    #33782
    Messages:
    4
    Gender:
    Male
    First Name:
    Pb
    Hey Bannock its been a minute but just wanted to say thank you again. the bracket is still holding up great and compressor is still going hard ! tundra_barn_0007_Layer 12.jpg
     
    Drainbung likes this.
To Top