Wiring a 20” Heretic Light Bar - Tundra 22

Looking for a little assistance… I have a 2022 Tundra (1794 non-hybrid, TRD package) and I am trying to wire my Heretic 20” light bar (https://www.hereticstudio.com/colle...022-toyota-tundra-bumper-light-bar-amber-lens) to an Air On Board switch (https://www.aironboard.com/online/toyota-push-switch-t107b-led-light-bar-blue.html).

Here is the instructions that came with the Air On Board switch



And here are the instructions for the Heretic…

along with the link for the YouTube video..they talk about the three wires at 8:53 (https://youtu.be/S5zGbu0OPeo). (Note, on the heretic lights the black wire is ground, blue wire is load, and red is the power supply).

I tested the lights with the factory Heretic switch and they worked fine, so I know they are wired correctly from the battery and ground. Now I just need to figure out how to configure the three wires to Air On Board switch.

I have tried color matching the Heretic and adapter, but that did not work. I have researched some but I don’t have the expertise on wiring I wish I had. Looking for ideas or experience on how to wire it?

Thanks and I appreciate any input.

 

Looking at this post

https://www.tundras.com/threads/‘22-off-road-build-with-diy-and-production-mods.105476/page-2

I am wonder if I can go black and white to black (heretic), red to red, and green and blue to blue (heretic).

Thoughts?

 

Figured it out for those who go this route:

Plug white and black to heretic black
Plug blue to heretic blue
Plug red and green to heretic red (or white)

Hope this helps the next person!