1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Who has raptor amber light on there tundra..

Discussion in '2.5 Gen Tundras (2014-2021)' started by Young80i, Dec 12, 2017.

  1. Aug 7, 2021 at 10:04 PM
    #121
    pvn.beluga

    pvn.beluga New Member

    Joined:
    Dec 28, 2020
    Member:
    #56744
    Messages:
    1,475
    Gender:
    Male
    First Name:
    Phuc (Phooc)
    Connecticut
    Vehicle:
    2021 Tundra DC
    Not sure at this point.
    Which kit are you using?
     
  2. Aug 8, 2021 at 4:19 AM
    #122
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    I built a bracket behind the grill to hold the 3/4” leds i order off ebay.
    Ryan
     
    This site contains affiliate links for which the site may be compensated.
    pvn.beluga likes this.
  3. Aug 12, 2021 at 4:00 PM
    #123
    MRQZTNDR93

    MRQZTNDR93 New Member

    Joined:
    Oct 21, 2017
    Member:
    #10422
    Messages:
    268
    Gender:
    Male
    San Diego CA
    Vehicle:
    2022 TUNDRA SR5 TRD OFF ROAD
  4. Oct 26, 2021 at 4:06 PM
    #124
    chingyeunglo

    chingyeunglo New Member

    Joined:
    Jun 11, 2020
    Member:
    #47841
    Messages:
    66
    Gender:
    Male
  5. Oct 26, 2021 at 6:56 PM
    #125
    LATERAL G

    LATERAL G New Member

    Joined:
    Feb 17, 2018
    Member:
    #12975
    Messages:
    91
    Vehicle:
    2013 RCSB SR5 TRD Off-Road 5.7 4x4
    Recently installed on my Tundra
    I like them

    PXL_20210917_155250995~2.jpg
     
  6. Oct 1, 2022 at 3:17 AM
    #126
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    how'd you wire/install the marker lights under the headlights and on the running board? its badass
     
  7. Oct 1, 2022 at 4:34 AM
    #127
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    i tapped in at the trailer harness. The side lights all blink with the turn signals in addition to running lights.
     
    mav7021234[QUOTED] likes this.
  8. Oct 1, 2022 at 11:49 AM
    #128
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Did you drill into the running board to install those lights?
     
  9. Oct 1, 2022 at 4:27 PM
    #129
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    Drilled into the pinch panel that comes down from the body. 3/4” holes.
     
    mav7021234[QUOTED] likes this.
  10. Oct 2, 2022 at 3:38 AM
    #130
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    did you tap into the headlight for the two led marker lights on the bottom headlight cover panel?
     
  11. Oct 2, 2022 at 5:42 AM
    #131
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    No. I had already run the wires for the 3 grill lights so i just tapped into them.
     
    mav7021234 likes this.
  12. Oct 4, 2022 at 6:06 AM
    #132
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Did you tap into the 7 pin? Or 4 pin for the trailer harness? I’m just confused, on my 7 pin the signal wire says “Right Stop/Turn”

    It’s going to illuminate when I brake and use a turn signal?

    E531DC12-D162-42A5-9044-0C172FC3EFE5.jpg
     
  13. Oct 4, 2022 at 5:48 PM
    #133
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    Hmmmmm. Im not sure off the top of my head. Maybe i did splice off a turn signal lead at front. Will have to check and let you know. Stand by.
     
    mav7021234[QUOTED] likes this.
  14. Oct 5, 2022 at 7:20 AM
    #134
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Were you able to check?
     
    Last edited: Oct 5, 2022
  15. Oct 5, 2022 at 8:48 AM
    #135
    joseph_womack

    joseph_womack @ 4x4bound

    Joined:
    Nov 3, 2020
    Member:
    #54467
    Messages:
    729
    Gender:
    Male
    First Name:
    Joe
    Louisiana
    Vehicle:
    2007 RCLB, 4WD, 4.7L V8
    3/1 Lift, 35s, Front Bumper, etc etc
    for my raptor lights I spliced into my turn signal. You should have 3 wires going to it, take a multimeter and figure out which wire comes on when you turn your DRL on, and which gets power when you hit your blinker. Tap into the wire that gets constant power when your DRL is on, not the one that gets power when the blinker is on (you'll know because the blinker power will... blink (on off on off))

    That is for a 2nd gen with the turn signal DRLs

    For the 2.5, if you have the DRL at the bottom of the headlight, you could just tap into whatever power wire is for that, and whenever those white DRLs are on, your raptor lights will also come on
     
    mav7021234[QUOTED] likes this.
  16. Oct 5, 2022 at 8:52 AM
    #136
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Thanks for the reply, my question was in regards to his running board lights.

    I fused tapped my grill marker lights into the headlight low beams
     
  17. Oct 5, 2022 at 8:56 AM
    #137
    joseph_womack

    joseph_womack @ 4x4bound

    Joined:
    Nov 3, 2020
    Member:
    #54467
    Messages:
    729
    Gender:
    Male
    First Name:
    Joe
    Louisiana
    Vehicle:
    2007 RCLB, 4WD, 4.7L V8
    3/1 Lift, 35s, Front Bumper, etc etc
    if your raptor lights only come on with your low beams, you could also tap into your brake lights for putting running board lights in, the "running light" portion of the brake light (not as bright a red as when braking) comes on when your DRLs or headlights are on, you could tap into those just like with the front DRLs and bring the wire to your running boards. Or if you wanted the running boards to blink like a blinker, tap into your rear turn signals on either side
     
    mav7021234[QUOTED] likes this.
  18. Oct 5, 2022 at 10:00 AM
    #138
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Thank you, I just need to find a post on where to snake the wires to get them close to the rear lights.
     
  19. Oct 5, 2022 at 1:52 PM
    #139
    joseph_womack

    joseph_womack @ 4x4bound

    Joined:
    Nov 3, 2020
    Member:
    #54467
    Messages:
    729
    Gender:
    Male
    First Name:
    Joe
    Louisiana
    Vehicle:
    2007 RCLB, 4WD, 4.7L V8
    3/1 Lift, 35s, Front Bumper, etc etc
    when I routed my reverse cam, I snaked it through the frame rail, then once you get to above the rear suspension, you should be able to travel upwards in the bedside to reach the taillight pocket
     
    ElNopal likes this.
  20. Oct 5, 2022 at 2:55 PM
    #140
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    I did tap into the front turn signal light circuit for the turn signals on them. Sorry about the misspeak. It has been a minute.
     
    mav7021234[QUOTED] likes this.
  21. Oct 5, 2022 at 3:00 PM
    #141
    iHacker

    iHacker SW TRD PRO

    Joined:
    Mar 19, 2016
    Member:
    #2962
    Messages:
    1,256
    Gender:
    Male
    Vehicle:
    TRD PRO Super White CM
    2019 TRD PRO LED Headlights, 2019 TRD PRO Rigid LED Fog lights, All LED Interior, LED Cargo Lights, Bed LED Lights, Undercover Flex, Husky Weather beater floormats, FORTIN EVO ONE remote start, TDR Cold Air Intake, Tundra tail gate inserts, Pop & Lock...
    Another option is also creating a T-harness instead of splice into turn signal plug to get the raptor lights switched with your parking lights (2014-17 SR5/PRO/Limited models only) for 2014-17 Platinum/1794 and 2018-21 SR5 models you have to splice into the side maker violet wire to get this same functionality.


    Parts needed


    1x Toyota 90980-11020

    https://www.corsa-technic.com/item.php?item_id=900

    PIN2, SL2 in the selection list

    1x Toyota 90980-11607

    https://www.corsa-technic.com/item.php?item_id=1041


    PIN2, SL2 in the selection list


    - The RED wire in the Raptor Lights > Violet wire in turn signal plug

    - Black (ground) wire Raptor lights > White wire in turn signal plug or simply grounded to any metal chassis part.


    That’s how my custom lights are wired so the lights only work with the parking lights.


    57F4BA05-C626-418C-B67E-1EBE97F48581.jpg


    CC1AF812-5320-47C2-82BB-4FE8344C63E8.jpg
     
    Last edited: Oct 6, 2022
  22. Oct 5, 2022 at 10:38 PM
    #142
    joseph_womack

    joseph_womack @ 4x4bound

    Joined:
    Nov 3, 2020
    Member:
    #54467
    Messages:
    729
    Gender:
    Male
    First Name:
    Joe
    Louisiana
    Vehicle:
    2007 RCLB, 4WD, 4.7L V8
    3/1 Lift, 35s, Front Bumper, etc etc
    yep, thats exactly how I have mine wired in, minus the custom T harness
     
  23. Oct 6, 2022 at 5:35 AM
    #143
    Redline870

    Redline870 New Member

    Joined:
    Oct 17, 2021
    Member:
    #69474
    Messages:
    225
    Gender:
    Male
    First Name:
    Ian
    Central NY
    Vehicle:
    2021 Super White TRD Pro
    Toyota didn’t do it because it “caught on” lol it’s required by the DOT for vehicles over a certain width. Same reason the TRX has them.
     
    Last edited: Oct 6, 2022
    boomsling and ElNopal like this.
  24. Oct 6, 2022 at 6:33 AM
    #144
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,529
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    If it is required then why has none of the other generation vehicles have them? ‍♂️
     
  25. Oct 6, 2022 at 10:47 PM
    #145
    Redline870

    Redline870 New Member

    Joined:
    Oct 17, 2021
    Member:
    #69474
    Messages:
    225
    Gender:
    Male
    First Name:
    Ian
    Central NY
    Vehicle:
    2021 Super White TRD Pro
    Because it’s wider than 80” and 1.4” wider than other trims
     
  26. Oct 12, 2022 at 4:47 AM
    #146
    mav7021234

    mav7021234 New Member

    Joined:
    Aug 21, 2022
    Member:
    #82220
    Messages:
    59
    Gender:
    Male
    Thank you. For those marker lights in the pitch panel. Do you have an issue where your turn signal will only blink once if your DRL are not on?

    I installed my OPT7 sidekick lights and I’m not super happy about them. I tapped into the front turn signal signal wire and DRL wire. I have an issue where my DRL needs to be on all the time otherwise my turn signal will only blink once

    Where did you tap into for the side marker lights in the pitch panel to function as both DRL and turn signal? I see you tapped into the front turn signal.
     
  27. Oct 12, 2022 at 2:33 PM
    #147
    Punisher29073

    Punisher29073 New Member

    Joined:
    Oct 25, 2020
    Member:
    #54055
    Messages:
    375
    Gender:
    Male
    First Name:
    Ryan
    White Knoll, SC
    Vehicle:
    2019 Tundra TRD Pro
    Clearance lights, Light bar in front bumper, Ditch lights, CB Radio, AGM Battery, SLEE Sliders,
    My 3/4” lights have 3 leads. 1) ground, 2) dim running light spliced into tail lights at trailer connector, 3) bright turn signal spliced into turn signals at bottom front of headlights.

    No issues that i am aware of.

     
    mav7021234[QUOTED] likes this.
  28. Oct 17, 2022 at 2:23 PM
    #148
    SuthrnTundra

    SuthrnTundra New Member

    Joined:
    Feb 5, 2016
    Member:
    #2623
    Messages:
    18
    Gender:
    Male
    First Name:
    Kyle
    Vehicle:
    2020 Cement Tundra Limited 4x4
    TRD Off-Road Grille TRD Off-Road LED Headlights
    What kind of lights are those?
     
  29. Oct 30, 2022 at 3:25 PM
    #149
    Young80i

    Young80i [OP] New Member

    Joined:
    Sep 11, 2017
    Member:
    #9593
    Messages:
    360
    Gender:
    Male
    First Name:
    Kyle
    Garden Grove CA
    Vehicle:
    2015 Platinum
    Where did you get those led lights?
     
  30. Oct 30, 2022 at 5:55 PM
    #150
    iHacker

    iHacker SW TRD PRO

    Joined:
    Mar 19, 2016
    Member:
    #2962
    Messages:
    1,256
    Gender:
    Male
    Vehicle:
    TRD PRO Super White CM
    2019 TRD PRO LED Headlights, 2019 TRD PRO Rigid LED Fog lights, All LED Interior, LED Cargo Lights, Bed LED Lights, Undercover Flex, Husky Weather beater floormats, FORTIN EVO ONE remote start, TDR Cold Air Intake, Tundra tail gate inserts, Pop & Lock...
    The lights are good but the wiring needs a few modifications to make it fully waterproof ohh and fit only for the 2019-2021 TRD PRO grille


    AUXLIGHT Car Accessories, 3PCS LED Center Grille Raptor/Marker Lights For Toyotaa Tundra TRD Pro Grill 2018 2019 2020, Come with Wiring Harness & Add-a-Fuse & Screws (Amber) https://www.amazon.com/dp/B0BBFLXG15
     
To Top