Stumped

Need help locating The brake light switch that I need to connect my Red wire from my Trailer break control. I'm a visual guy and hoping for pictures. I've been told it's tan or baige in color but don't see any tan wire near the brake pedal.

 

That might be the color of the switch itself. I've seen many that were an off white.

 

I assume you want the trigger wire for the brake coming on? When the pedal is pushed wire goes to 12v?

It is the beige wire in Pin#1 of the A4 stop light switch. The diagrams below could help you locate it. Should be a 4 wire connector under the dash.

 

Look just to the left of the brake pedal. This is on my 2007 but should be very similar to your. The large brown/tan wire in top left corner

 

Your picture might help I'll take a closer look thanks

 

Yes your picture helped mine was covered up with a rubber cover boot and thanks I found the Beige colored wire to hook to

 

All working and good now?

 

Just found it still have to do the work and hook to the trailer to test

 

All done and wired up everything works really good thanks for your help