1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2017 6" lift help

Discussion in 'Suspension' started by Wxguru, May 11, 2022.

  1. May 11, 2022 at 1:06 PM
    #1
    Wxguru

    Wxguru [OP] New Member

    Joined:
    Nov 22, 2021
    Member:
    #70925
    Messages:
    12
    Gender:
    Male
    First Name:
    Paul
    Vehicle:
    2017 Tundra crew 4x4
    Sorry for my ignorance guys....
    I bought this 2017 in October. It is sitting on a 6" lift.
    And look like it is pieced together. RC crossmember, Icon II UCA's, stock LCA's, has the blocks in the rear. And Bilsteins on all 4 corners.

    Front shocks are coil overs with a spacer between the top of shock and body mount.

    I am about to get it back after it was in an accident (rear axle torn out from under it....I have a thread in the 2.5 14-20 yr section).

    The test drive after it is all back together says a popping in front left. They replaced the LCA on that side because they saw some movement on it that wasn't right. Still a pop.
    The alignment shop says CV Axle angles. I think I agree with that. I have attached pics here and would like feedback on yes, no, they are insanely bad, whatever. I can take it...lol.

    And what would correct this...a Diff drop, etc?

    Thanks in advance....from a rookie who bought it without knowing what it is supposed to look like.

    20211114_130640.jpg
    20211114_130756.jpg
    20211114_130721.jpg
    673459645.jpg
     

Products Discussed in

To Top