Coach builder +1 Shakles

Sold

 

I'm looking at them. Might be interested. Let me so a little looking and research. Thanks.

 

If you have any questions feel free to ask or look here:https://www.tundras.com/threads/the-coachbuilder-trd-pro.23416/

I've ran the +3s and +2s, so I can also steer you in the right direction regarding height, even if it means not getting these ones.

 

Thanks my friend. So I have a 2020 limited with a nice Leer shell, so back has a little weight on it. I have Bilstein 5160's in the rear and just bought TRD PRO Bilstein front coils with CB shims, 2 for driver and 1 for passenger. Worried front might be a little high. I just want it level. Thanks.

 

I have TRD Pro Bilsteins front and rear, and then added CB +1 shackles for a little bit of rake. They only add 5/8 inch, and that was perfect for me. I'll bet it will be level for you with your Leer.

 

Stock rear on these trucks seems to be around 2.5" higher than the front, sounds like you're adding 2.5" of lift to the front. With a camper the +1s would put you pretty close to exactly level. If that was your target and you ever needed more you could get a small leaf shim to fine tune it.

Otherwise, the +2s would be a safe bet to prevent the front from ever looking higher than the rear, but they will almost certainly result is a small amount of visible rake.

Im currently on +2s, front set to 2.75" of lift, the rear is still visibly higher.

 

Had a question, I’m ordering king 2.5 front and rear with Camburg uca and shims would this be a good for the rear?

 

Yes, unless you jacked the front up over 3” or carries weight in the rear constantly.

The +1s are made to raise the rear enough on a 2.5” lift to be close to level. Lots of Pro guys add them to get some rake back. Basically with 2.5 in the front and +1s in the back you’ll be at .5” higher in the rear, maybe a tiny bit more.

 

I think this is what I’m looking for… I’m adding 5100’s and was planning on running either the middle or top and I’ll need to raise the rear to level out. Not sure if I need the 1” or 2” shackle…

also do these come with the bushings?

 

These include everything necessary for install.

Bushings
Grease
Bolts and shackles

5100s and the +1s would work well with either the top or middle settings.

 

For sale again, decided not to run them for now. My loss is your gain, price is about $40 less than new.

 

Bump

 

Bump

 

Still got them? What's the cost?

 

$285 shipped

 

Were they ever installed?

 

They’re brand new

 

Does this come with the carrier drop bearing kit too ?

 

I cant recall. I can open the wrapping up, if I remember correctly the +2s and +3s come with them. The +1s dont need them.

 

I’ve got a 2013 with the 12” Bulletproof lift. I’ve noticed it has a slight squat in the back and looking at these it looks like Coachbuilders makes kits for these lifts and the shackles help bring the rear more level.

I just got the tie rod ends, so this would basically complete their kit.

would these 1” do anything or should I look at the 3”?

 

If the front is higher by anything less than 1/2" than the +1s will work. Otherwise I'd look into +2s.

 

I’ll post updated pictures today.

 

I ended up buying the 3”. Looks like Coachbuilders offers a full Bulletproof 12” lift “kit” which includes these 3” shackles for a more level ride.

getting installed in two weeks.

 

Added pictures without the wrap.

 

Bump

 

How are these still for sale? I have these in my truck and it's fantastic. Adds back a little bit of rake if you are leveled. Perfect for towing.

 

Dunno, have had a ton of odd offers, most are forgetting that CB does charge shipping, so theyre pretty low.

These are brand new and 15% off the cost of new from CB.

 

Keep in mind that it’s $305 - 5% with the site promo code ($289.75). Your asking is still less and tax/shipping free.

 

I kinda want them, but I don't NEED them.
Any interest in trading for a Pedal commander?

 

I would, but already have a pedal commander.