NSV Light Bar Install Tips

You are super close with that diagram

 

bringin this back up. i have a 2016 tundra with an IHACKER harness for the led headlights. only the middle of the NSV light bar works for me. the 2 little bars on the side does not work. I think im missing a connection to the turn signal harness can anybody help me out on this. so tired of a 1k light not work as its suppose to.

 

Yes his name is jensen i bought a bew harness for my install. i think when i talked to him he was just almost done with a bunch of people asking how to install the lights so he just gave me a number of a person that installs them from a local dealership. I messaged the guy and he never responded. Im a local too i live near longbeach where the hq for nsv was.

 

Hello there, it seems you have a lot of knowledge on this light. So I don't use the DRL feature on the light bar, can I just easily re-pin the DRL to strobe pin 3 so from pin 9 to pin 3. I assume if I press DRL it would trigger the strobe feature? Thanks for the help.

 

I got it! I finally crack the wiring on this light bar. (GREEN IS SWIPE not STROBE)

Pin 1- red/blk, ignition (12vdc + ) power up when the key is turned on
Pin 2- red small gauge, (12vdc +)
Pin 3- empty
Pin 4- red large gauge, 12v + power
Pin 5- green, swipe light function!! (hot trigger 12VDC + trigger!) (from customer provided selector switch)
Pin 6- brown, off-road entire light bar on high! (hot trigger 12VDC + trigger!) (from customer provided selector switch)
Pin 7- orange, indicators (no connection!!!)
Pin 8- yellow, DRL ( 12vdc Hot triggered! two outside lights on bar on on high) (from customer provided selector switch)
Pin 9- blue, (12vdc hot trigger! two outside light on bar on low mode)
Pin 10- white, high beam ( 12vdc negative!!!)
Pin 11- purple, low beam ( 12VDC negative !!) tells the light bar the low beam are on?)
Pin 12- black, ground (12 VDC negative !!)

 

So If using all the switches from NSV light bar. I see grey is strobe. What wire can I trigger this feature ?

 

If you connect a 12Vdc + to the grey wire, this should trigger the strobe. It works on my light bar (BTW - my wire is green). Let me know if it works for you!

EDIT: the grey is swipe back and fourth !!! not strobe... I have no strobe function.

 

I will try this, how about the swipe feature. Does that work for you ? I saw some one youtube that has all the function. Swipe and strobe as well.

 

Thanks Ritchie

 

See my EDIT: Green is swipe "left to right - right to left function!" I have no strobe function!

 

Got it, thanks but mine is actually working how it should be. I just wanted to add the strobe feature. I will just run a wire to the strobe from my SPOD. Again thanks