SCS Ray10 wheels 18x9

Gotcha, I was going off of stock pro size. That’s what I’m leveled at & it’s maxed out. I should run a 285/75/18 to save a half an inch. That’ll be next go.

But you’re lifted up man, go big or go home!!!!

 

Yeah the only thing bothers me power loss and gas. But he did not notice it much at all. You have a side shot of yours?

 

Not rays but looks good 35s?

 

I stopped paying attention to that a long time ago ha, but I get reimbursed for mileage anyways. You gotta pay to play is the way I look at it

 

Yeah it definitely looks good with the westcott lift and the bigger size tires.

 

yeah, like everyone else mentioned, 275/70's will keep the tread within the fender well line but the sidewall of the tire is roughly 1/2" outside the fender - in Hawaiʻi, tread has to be under the fender in order to get an annual safety inspection

that's actually a lot less than I thought. I'm about to get 295/70's and was wondering how much it was gonna stick out on Ray10's.

 

They don’t not stick out though. I guess it’s all based on the angle that you’re looking at

 

Second coat of satin black rustoleum went on today. First coat looked pretty good.

 

Here are the Ray10's with Cooper XLT's - 275/70/18. 1.75 in Rough Country leveling kit on the front. Rear is stock.

 

Man that looks really sharp! Just the right amount of tire sticking out to look aggressive!

 

What TPMS do you guys use? I have a 2020, planning to keep the stock wheels and purchase a new set of OEM TPMS for the ray10s. but I found 3 different(or same) sensors on sparksparts. 42607-0C101 42607-06030 42607-0C091 assuming they all work on TRD wheels, which one works best on ray 10?

 

I have a 21 Platinum. The shop just used my oem tpms, so didn't have to buy more. Not sure why you would.

 

I would move over the stock to rays and get after market for oem lots of post about finicky tpms sensors

 

Ya thats a good idea lol, I only need those trd wheels for winter salty months.

 

Was at 4WP today looking for some tires to throw on. 285/75r18 is the target mark but seems like most tires are out of stock. Anybody running the Geolandar X-AT? K02's need to come out in a 285/75r18...

 

I had shop move mine over to the Rays as well. Had them put some blank stems in my TRD OR wheels and then sold them as a set on OfferUp.

 

If I decide to run 2 set ups with my wheels. I will put my oem in my new Ray10’s and run the Pro wheels with normal value stems for the winter. Yeah you will have the light but I did it years ago on my 98 Tacoma and had no issues. I don’t think it will cause a issue.

 

Just a FYI, Ray10 wheels are currently in stock as of last night. This is your chance if you’ve been waiting for inventory. Just place my order.

 

Man I blew a tire last week & was thinking how nice a full size spare would be. I’ll see how long they last

 

Yup and just ordered a set in bronze.

 

Finally after 3 years of back and forth between the Ray 10's and SR 8's I just placed an order for Matte Gunmetal Ray 10's. Order #28734.

 

They are moving some wheels. My order yesterday was #28670.

 

And that is the reason you have to grab them when they become available as they won’t last long. Then play the waiting game again for them to come back in stock.

 

It would be great if they were 17x9 with -10 offset

 

@SCSPerformance you've got mail

 

Matte Jet Black Ray 10's are ordered! This'll be my 3rd set of SCS on various Toyotas... can't wait.

 

Funny thing is that this time around they are lasting. Last time I tried they sold out quickly, especially the bronze. I just checked, they are still available. I already ordered a set. Wasn't going to pass this up.

 

I think they ordered more this time around to try to keep up with demand.

 

Good thing they did so I was able to get some.