What have you done to your 2.5 gen Tundra today?

oh so you have to remove 2 screws on each tab? then warm/heat them up then start prying?

 

2 screws on each side of the surround. Only 4 total holding the grille. Then start on one side, working the clips loose, heat encouraged.

 

Body mount chop today, waiting to cool so I can paint

 

I’m no welder but those look pretty dang good.

 

Installed the ESP Underseat storage.

 

Thank you sir! It was a fun project for sure. One day when I have a nice shop I'll make my services publicly available

 

Mine is stock, not sure I will lift or level... trying to see what tires I want when these H/T's run down. Thanks!

 

Just bought it a

$1,450 Pioneer DMH-WT8600NEX PIONEER CAR DMHWT8600NEX Top Of The Line 10.1" BT CarPlay Amazon Alexa Built-in, Android Auto, Apple CarPlay, Bluetooth - Floating Type Multimedia Receiver

Pioneer DMH-WT8600NEX head unit. Looking forward to getting it installed.

 

Painted Icon Billet UCAs installed. Mammoth Guards had to be trimmed a little to allow full droop.

 

Latch covers BLACK

 

275/70/18 KO2’s . Up on the jacks it looks like I have a nice lift .

 

So how is the look of the snug? I've always had ARE and it seems they are a little small compared to the cab.

I'm going to make that upgrade next year so starting to look for info now

 

Got the doode dynamics ss3 sport SAE driving lights installed. I quickly wired them up with a relay to the high beams. I will eventually wire them to a switch in the cab and it some diodes in line so i can have the high beams or the switch trigger the lights and not have feed back. Got the lights from @memario1214.

 

View from the inside of my truck after work. Freezing rain made it fun driving home.

 

thank you - i spent some time on that build thread. my truck keeps getting more and more expensive lol

 

Yeah.... this forum may be free to join. But the membership definitely isn't cheap

 

I snapped off a tab close to the bottom - but its a small one about 3 inches on top of the very large very important one lol

 

Nothing wrong with that grille. I say keep it and change the surround and bulge.

 

Washed it for the first time since purchasing last month.


Installed the rails for my Rhino Vortex rack on the camper shell. They failed to send the keys for the 2 legs provided, and failed to send the second set of legs altogether. Rhino was nice enough to send another set of legs out.

 

nice - are you doing speakers and amps too?

 

how did you pop off the OEM steps, i'm assuming that's what you did and snapped on the new step on top of the bar? or did you replace the entire bar. I like my car, it's powder coated metal black but want to maybe remove the steps and rhinocoat them, I can feel they are plastic but didn't wan to pry too much just yet till I figured out how they are attached, they look good, just want more traction

 

Pretty sharp looking.

 

This is really why I have planned. Can’t go wrong either way IMO.

 

Not yet, first round will be head unit. Then speakers amp sub sound deadening

 

These are complete replacements. 8 bolts per side to take off the oem steps.

 

Installed OEM fender flares on the 2021 1794 Tundra

 

That's good to hear! I figured they would do well since they're aluminum but it's good to hear first hand.

 

Are those color matched? Looks good. Miss the flares from my 1st Gen

 

How do you like your Rhino steps? Is there enough room to get your foot on without slipping (especially exiting the vehicle)? I've considered these but haven't made a final decision. I'm between the Rhinos or the Amp power steps.