Magnuson Supercharger Kit (No Tune or Fuel Pump)

The kit is a 99% complete kit and has about 15,000 miles on it.

I loved the supercharger when it was on my truck, but things happened and I had it removed (and no longer own the truck it used to be installed on).

Depending on how familiar you are with the Magnuson/TRD kits, there are a few known issues with them that are solvable, namely the coupler and the intercooler reservoir leaking.

The couplers start to rattle after ~15,000+ miles, which progressively gets worse and turns into sounding like a can of marbles being shaken (or spray paint being mixed). The solution to this is to replace the coupler with the Superchargers Online PEEK Coupler, which I have (and will include in the kit). I had purchased it to install it, but never got around to it because installing the coupler requires you to lift the supercharger off of the engine in order to make the right amount of clearance for it. The second issue with the intercooler reservoir leaking I resolved by "double clamping" the reservoir, and never ran into that issue after that. The coupler in the supercharger is not rattling but I read too many things on the internet and like to keep on top of preventative maintenance. that is the "SCOL" box that is in the pictures.

I also have a TRD lift bracket for these superchargers, which is one of the most convenient things in regards to installing the supercharger if you have a 2 ton engine hoist, as you don't need to lift the 80+ lb supercharger onto the engine.

Only things missing from the kit are:
Small tube of (I think it's lithium grease) that they recommend for use on fuel component rubber. I lost it and can't find it in my garage
Sticker for belt routing information
High capacity/flow fuel pump (new one can be acquired at SCOL)
Tuner/tune

I'll include the spare parts I bought for the supercharger kit, so

2x new Dayco serpentine belts
A bunch of 90 degree pieces of 3/4" heater hose for intercooler piping that are new, and some straight pieces as well. Never know when you need new heater hose on the trail.
New intercooler piping heat shrink clamps
8x new IKH22 spark plugs

If you're installing this on a 2014+ Tundra, there is a PCV heater hose routing that you'll have to do, and I'll be including the modified heater hoses for this. I will include my modified (stupidly expensive) left-side radiator shroud that the intercooler hoses pass through. I'll also include the modified PCV vent hoses, which means that if installing on a 2014+ Tundra, you won't need to modify any of the components they ask you to in the installation manual.

I still have the new O/E K&N air filter that came with the kit because I never used it, as I always ran the OE air filter for a "2nd gen" Tundra.

I'm looking for $5000 shipped for this kit within CONUS, and can ship it further if necessary but at additional cost. It's also available for a lower price if you want it pick it up locally, just let me know.

 

For 15k miles on the kit, that's a great deal. If I was in the market for one, I'd be tempted to give this one a good look before buying new. Good luck on your sale.

 

Damn. Wish I had the cash for this. Good deal. Free bump!

 

@Tundyfundy Not sure if you're still in the market for one.

 

What does a tune and proper fuel pump cost?

 

A new TRD/Magnuson Denso OE pump can be found here: https://superchargersonline.com/product/trd-magnuson-fuel-pump-for-toyota-tundra/

I was just going through my box of parts and I found my brand new fuel filter (the top half of the fuel pump bucket assembly), and will include this along with the spare bucket I have; this means you'll have a completely new fuel filter/level sender, and will just need to put a new pump into it.

As for a tune, there are a couple of places you can get canned tunes (I think Magnuson might even sell them but I can't speak for them), or DAP tuning... or you could self-tune with vF Tuner...

Most folks end up opting for a custom dyno tune though to really get the kit running in synchrony with their trucks.

 

Dang, very tempting.

 

is there a $2000 discount for picking up?

asking for a friend

 

In case anyone wonders, the seller is a top notch fella, quick shipping and answered all my questions on a separate purchase.

 

I don't know if I could pull off a $2000 discount, but if you are seriously interested, DM me and we can work out a number!

 

Can you please wait until next March 2022 when my year end bonus comes through??

Killer deal man, I wish I could jump on this. Sometimes I hate having money but being responsible with it

 

Who do you get the tune from?

 

There are quite a few options for a tune; however, if you are trying to tune a 2020 truck, I don't think there are any "safe" options at this point unfortunately. Most folks with 2020+ trucks are currently waiting for Mat/the developer at vF Tuner to release 2020+ 3UR-FE support

 

Damn a full LT header system and 3” exhaust is the same price can someone please buy this

 

So tempting!

 

Pm’d

 

Damn! Secret details behind closed doors right now

 

Correct me if I am wrong, the original version was not compatible with the flex fuel engine, is this newer version?

 

Still available?

 

This has been sold! Thanks for the interest.