1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Retrax MX One Adjustment Screw Lengths

Discussion in 'Tonneau Covers, Caps and Shells' started by PomDad, Oct 1, 2021.

  1. Oct 1, 2021 at 5:49 AM
    #1
    PomDad

    PomDad [OP] we having snacks?

    Joined:
    Aug 28, 2020
    Member:
    #51461
    Messages:
    420
    First Name:
    Conrad
    Atlanta
    Vehicle:
    2021 Cement Limited
    I just 'finished-ish' installing my Retrax MX One to the Tundra's bedrails, but I cannot get the 'A' (front of the bed above the canister) and 'C' (tailgate) rail distances equal. Currently, my A location measures 57 1/4" while my C location measures 57 3/4".

    I can't really increase the A location as it is above the canister and a 'fixed' width, so I should adjust the C location adjustment screws in to remove the ~1/4" difference per the installation instructions. The kicker is, I've already reached the end of the adjustment screws at the tailgate on both sides.

    Should I just shim it to reach or have I messed something up in the installation? I feel like the whole system is ~1/2" too narrow in my bed. I've watched countless videos, but nobody seems to even come close to using up their entire adjustment screw or address that as an issue.
     

Products Discussed in

To Top