What have you done to your 2.5 gen Tundra today?

Naw, not if you get the "Special Edition" TRD Pro Spinner wheels from Southeast Toyota dealers. Just the tires turn and the center of the wheel with air outlet is stationary, duh.

 

So this happened today.

Falcon shocks, Coachbuilder +1, Coachbuilder bumper shims, Icon 6 Speeds, 295/70/17 KO2s. I’ve only been able to drive it for a few miles but the ride is freakin awesome! Prior setup was stock with the 20” TSS wheels and 275/55/20 Duratracs.

Not a perfect view. The driveway slopes and all my old tires/rims are in the back.

 

So my Limited came with Chrome LED headlights stock.... The DRL's were good with the stock lights as well as with the Alpha Rex. They are bright in the day time but i have no way to compare now. The DRL's have multiple modes so that when you have IGN on with no lights on they are brightest.

Ignition/Engine ON – DRL at High intensity
Parking Light ON – DRL at reduced intensity
– amber side marker
Low Beam ON – DRL at reduced Intensity
– Amber side marker
– Low beam on
High Beam ON – DRL at reduced Intensity
– Amber side marker
– Low beam on
– High beam on
Automatic Function – Will function as normal

The have a really cool startup routine where they startup amber then flash in a sequence and then go white. The big difference is in the low beams and the high beams which are both way superior (and brighter) with the Nova's while maintaining DOT.

The tail lights look great on and off...The brake and turn/flashers are big and bright.

The leveling motors work and the auto dim brights work

 

Looks awesome, my tires were scheduled to be installed today but haven’t showed up yet.

 

Did a ton! Ajt designs interior bits, led tails, started the audio system. Started an Instagram page for the truck as well. @tundramodshop

 

Start a build thread here in the forum as well.

 

Will do! Thank you!

 

Removed badges and replaced the 5.7s with black. As far as debadging goes, it sucks. I used a heat gun in addition to letting each side of the truck sit in direct sunlight on a hot day. I still left tons of adhesive on the truck after prying the badges off. After picking all the adhesive off that I could, I sprayed some Goo Gone on and gently scrubbed after letting it sit for 15 minutes. I can still faintly see the outline of the removed badges. I’m going to wash the whole truck as soon as I can and apply some Griot’s synthetic clay bar followed by Griot’s 3 in 1. We’ll see how it comes out then.

Also, had some Pro wheels mounted up. I like them with the Land Cruiser center caps. Going to order some black lug nuts as well.

 

"It's not who you are underneath, it's what you do that defines you."....Holy Moley, that is Bat-ASS!!!

 

Looks great - here are the part numbers for the black lugs with pricing from Lewis Toyota
PT2763420002 $ 51.75 Alloy Wheel Locks - Black PVD (four locking lug nuts and one key)

$29 PT0760C20002 Toyota Genuine Land Cruiser Sequoia Tundra Black PVD Wheel Lug Nuts (5 Pack) PT076-0C200-02

PT0760C20002 $ 12.94 Black PVD Lug Nuts (package of five - one package needed for each wheel - four packages for complete set)

 

I LOVE that color. Truck looks good man

 

Do you know if there are any taillights similar to these? Other suggestions are welcome too! Also not trying to break the bank

 

Do a search or create a thread. Many different threads on taillights already. I think you will find some you like. The Alpharex and HiRevs are currently the most popular aftermarket and both are affordable.

 

nope! it was very straight forward. plug and play and a little wire tap for the turn signals is all! One thing i can say though, because the Alpharex uses milky white color translucent lens for the DRL, it's not as bright looking at the OEM clear lens. but my fogs with DRL compensates for that.
that's my only concern in broad daylight. but other than that, the DRL and sequential are very bright and visible when not facing against the sun.

 

thank you for the feedback! I just recently installed Alpharex on mine too and i love them! I didnt go with the "premium" Nova series. I just have the TRD style with reflectors and LED and it is already a huuuge upgrade from my stock halogens. And I agree, I love the little start up sequence it does lol

Gonna get me some Alpharex tail lights next!

 

Really digging those tails

 

Interior chrome delete progress. That cup holder glare is no joke.

 

I’ve heard you really only need it if you’re supercharged which I’m not. I got this off Amazon for $20ish then I bought 6ft of 1/2 hose from Advanced Auto. It’s function is pretty basic I didn’t see the point of spending $200.

Ruien Polish Baffled Universal Aluminum Oil Catch Can Reservoir Tank Black

$24 RULLINE Universal 350ml Oil Catch Can Tank 0046 Aluminum Polish Baffled Reservoir Black

https://smile.amazon.com/dp/B06XK9PTP7?_encoding=UTF8

 

Cali Raised brackets and Baja Designs Squadron Sports

 

that’s one BAAAAD tundra

 

Dopplegangers available on ebay for $140 from this post

 

Wheel caps look great with that body color. I just changed out my chrome lug nuts on my pro wheels for black.
Here’s the part number for the lugs if don’t already have ‘em.

 

Thanks, gentlemen! I ordered the lugs from McGeorge with the part numbers provided. They were a bit cheaper than Lewis.

 

It's just you.

 

They all have bent corners lol

 

I installed an OPT7 taillight

$130 OPT7 60" Redline Triple Row LED Tailgate Light Bar w/Sequential RED Turn Signal - Weatherproof Rigid Aluminum Frame Light Strip for Trucks - No Drill Install - Full Function Reverse Brake Running

bar today. Super easy installation with a CURT wiring

$23 CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness, Black, 6 x 3 x 9"es

adapter and a

$13 Lockitt POSI-TAP Assortment pack wire connectors 10-22 awg

posi-tap for the reverse signal. I mounted it using a couple heavy duty

$7 DIYMAG Neodymium Bar Magnets with Epoxy Coating, Powerful Permanent Rare Earth Magnets- 60 x 10 x 3mm, Pack of 6

magnets and protected all the wiring with

$16 Electriduct 3/8" Flame Retardant Polypropylene Split Wire Loom Tubing Corrugated Conduit with Flammability Tracer - 25 Feet - Black

split loom. It blocks the spare tire access hole, but shouldn’t be a big deal to remove with the magnetic mount and plenty of coiled up slack in the wiring.

 

Best $150 I’ve spent thus far!

 

Who did you purchase thru? Im about to do this myself. I'm seeing prices a lot higher than $150. And a lot of places are just out of stock.

 

Best place I found was my dealer direct. Paid a little below MSRP and shipping was free.