SCS Ray10 wheels 18x9

I switched from Pro wheels to Ray 10s, I should've tried it. Sold the Pro wheels already.

 

Trigger pulled….. will post when mounted. Thanks for everyone’s pics

 

Same!

 

Thanks! I was able to get a set this last go around 8/17 and they should be here Tuesday!

 

Dang, out of stock

 

Just ordered these and the ETA is mid October. Which is fine I haven’t installed them yet as I’m still research options on ceramic coating the wheels.

 

What size fits?

 

The M6*8 mm, you don't need the nut. You need about 80, I got the 100 pcs.

 

Be super careful with those plastic screws, they are extremely weak and fragile. I tried to swap mine out with these and I broke the heads off of several of them and had to extract the remaining stud, which being plastic was harder than it needed to be. I was only using hand tools, not power tools and even after the first one broke I was being super careful and still managed to break a few more. I said screw it and removed the rest of them and put my stock bolts back in. Even removing the 20 or so I had already installed I broke the heads off of a few more. The upgrade in looks wasn't worth the headache of removing those damn plastic pieces. After all that I'm keeping them as is.

 

Thanks for the heads up. I haven’t ordered them yet because I don’t have the wheels on at the moment. I might just dip the heads black while they’re off the truck.

 

Thanks everyone for sharing info. 275/70/18 wildpeaks. Front flap removed. Rear flap rubs on full lock reverse. Will trim.

 

Looking good!

 

I will have an answer for you tomorrow. If I was to guess, no it doesn’t.

 

I have continually ended up empty handed trying to get these wheels but FINALLY found a great deal on a set of used ones. I read someone else say that most wheels just look like "wheels" and don't compliment the truck and I agree with that 100%. You've got one thing going on with the truck and the wheels kind of doing their own thing, so the highest compliment I can give the Ray10 is that its the only wheel I've had that looks like it belongs on the Tundra. (This will be the 4th set of wheels for me in the last 6 months) Then you add hub-centric on top and the lighter weight and its a no-brainer. I'll also say its very hard to photograph these properly, you really to do need to see them in person. I suppose all this makes sense when you consider they were designed specifically for the Tundra but regardless, I'm very glad to have them. Another happy customer!

 

The Ray 10’s are awesome. Almost pulled the trigger on a set. But waiting for the F5’s to come out. Had them on my 4runner Pro. There going to look bad on the tundra.

 

anyone running 295/70 Yokohama Geolandar G003's on their Ray10's? thinking about upgrading from 275/70 Ridge Grapplers. I'm on 6112's @ 2.5 so I'm guessing I'll need to trim/cut/heat/smash some stuff to make it work.

 

I see a lot of you guy's using Black lug nuts. What Lug Nuts are you guy's using?

These?

Gorilla Automotive 76643NBC Black 14mm x 1.50 Thread Size Chrome Finish Duplex Acorn Wheel Lock with 5-Lug Nut, (Pack of 20)

https://www.amazon.com/Gorilla-Auto...refix=14x1.5+gorilla+lug+nuts,aps,227&sr=8-14

 

I got mine direct from SCS

 

Finally had mine mounted today.

 

Are you running 285’s? Also any rubbing issues? Thanks.

 

295/70s. I removed the mud flaps, but still rubbing in reverse. Should be fine after tucking the liner in.

 

How did you black out the bolts? With the nylon bolts mentioned in this thread? Or something different?

 

I rattle canned it. I can post a close up tomorrow to compare.

 

Finally installed my SCS Ray 10s. 275/70/18 Cooper Discoverer AT3 XLT. SLIGHT rubbing on the front mud flaps that will require a small amount of trimming/molding.

 

Nice, so you took all 80 out? Lol

 

While we’re at it, how did you black out your bolts? Ha

 

Haha, I didn't count them when I was doing it, but yes. I took all 80 out and rattlecanned it. OCD kicking in. Black bolts came directly from SCS. Have some black wheel locks on order from Gorilla auto products

 

SCS sells the black bolts? I haven’t come across that yet.

 

Every single one. Sprayed it with Krylon Satin and put blue loctite on before putting them all back. I also order my black lugs from SCS.

 

I’m getting my wheels mounted on Friday. They’ve been sitting in my garage for over a month since I scored on the last drop. I somehow haven’t even opened a box yet! But I know as soon as I see those chrome bolt heads I’m gonna freak. I need to take them all out in the next couple days & just do it since they’ll be off the truck