1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lights

Discussion in 'Sequoia Builds' started by farnsrocket, Jun 25, 2021.

  1. Jun 25, 2021 at 8:27 AM
    #1
    farnsrocket

    farnsrocket [OP] New Member

    Joined:
    Feb 14, 2021
    Member:
    #59103
    Messages:
    325
    Gender:
    Male
    Got my light bar and ditch lights hooked up finally.
    Light bar is a single row from 4WDKing as well as the ditch lights. Yeah, cheap but I am not spending over $600 for lights.
    These are very bright! We'll see how long they last.
    I took them apart and sealed everything with black silicon.
    Switches are actually pretty nice. I had to cut them in the dash to fit and it turned out nice.
    Nilight wiring harnesses.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    [​IMG]
    [​IMG]
    [​IMG]


    [​IMG]


    [​IMG]
     
    Last edited: Jun 25, 2021
    Bob, Bigboitundra and donellyd like this.
  2. Jun 29, 2021 at 2:41 PM
    #2
    everydaysomthing

    everydaysomthing New Member

    Joined:
    May 31, 2021
    Member:
    #63744
    Messages:
    12
    What ditch pod mount are you using?
     
  3. Jun 29, 2021 at 3:11 PM
    #3
    farnsrocket

    farnsrocket [OP] New Member

    Joined:
    Feb 14, 2021
    Member:
    #59103
    Messages:
    325
    Gender:
    Male
    Rago Fabrications…….they are for a 2nd Gen Tundra.
     
  4. Jun 29, 2021 at 3:21 PM
    #4
    everydaysomthing

    everydaysomthing New Member

    Joined:
    May 31, 2021
    Member:
    #63744
    Messages:
    12
  5. Jun 29, 2021 at 3:22 PM
    #5
    omgboost

    omgboost The Accountant

    Joined:
    Apr 19, 2019
    Member:
    #29334
    Messages:
    1,087
    Gender:
    Male
    East Coast
    Vehicle:
    2012 Sequoia Platinum
    Yes, I have those too for my Sequoia.
     
  6. Jun 29, 2021 at 3:24 PM
    #6
    everydaysomthing

    everydaysomthing New Member

    Joined:
    May 31, 2021
    Member:
    #63744
    Messages:
    12
    Awesome, any tips on the install?
     
  7. Jun 29, 2021 at 4:18 PM
    #7
    omgboost

    omgboost The Accountant

    Joined:
    Apr 19, 2019
    Member:
    #29334
    Messages:
    1,087
    Gender:
    Male
    East Coast
    Vehicle:
    2012 Sequoia Platinum
    Do one side at a time. Very easy to install. Unbolt two bolts on each side, slide bracket in, bolt back up.
     
  8. Jun 29, 2021 at 9:57 PM
    #8
    farnsrocket

    farnsrocket [OP] New Member

    Joined:
    Feb 14, 2021
    Member:
    #59103
    Messages:
    325
    Gender:
    Male
    You want to be careful to not lose the position of your hood on the hood mounts so your hood lines up correctly to the fenders and latch. I traced around the hood mounts on to the hood with a Sharpie just in case the hood slid around as I was installing these.
    I removed and put one bolt on the bracket with the bracket just to the side of the other bolt and tightened that bolt up pretty good but not all the way. Then took the other bolt off and slid the bracket over into position and put the bolt back on and tightened both bolts down all the way.
     
  9. Jun 29, 2021 at 10:00 PM
    #9
    Tundra2

    Tundra2 Zoinked

    Joined:
    Feb 10, 2019
    Member:
    #25875
    Messages:
    11,788
    Gender:
    Male
    First Name:
    Noah
    Western Kentucky
    Vehicle:
    '00 Tundra V8 SR5 '03 Corolla Virus

Products Discussed in

To Top