What have you done to your 2.5 gen Tundra today?

yakima roof rack and 52” windshield.

 

Had to join the fan club on this one.

Also, this isn't AJT but I found them on ebay.

 

Wasn’t much but changed out the engine and cabin air filters today


Edit: don’t buy the HEPA. Greatly reduces air flow inside cabin. Me and my wife got hot driving into town today. At least don’t buy it if you live in a hot climate

 

Doesn't seem like much but you'd be surprised how neglected some of these are.

 

Just did mine too

 

I’m at 28,000 miles now so figured it was time for a change. And if not then doing early can’t hurt I figured

 

What did you go back with

 

@FancyPants digging your new wheels. What is your setup (lift, uca, spacers, offset)? Did you do a BMC or have any rubbing? Looking to upgrade my wheels and tire combo from 34" running a 3/1 Ready Lift.

 

Went around the truck yesterday re-checking most of the major bolts I touched when I installed my Readylift 3/2" several weeks ago to make sure they hadn't loosened or were having any issues.

I used lock tight (blue, not red). I'm a little worried. Do I have reason to be concerned and what do others do regarding their bolts, etc. to ensure they stay tight?

 

Went with FRAM with the cabin air filter and I have the TRD PRO air intake so I used the KN cleaning kit

 

Sent you a message, do you have any other pictures with this Kenwood. I am thinking about installing the same unit.

Regards,

 

Offset is +18mm and I have a 4” Rough Country lift. I am rubbing in reverse and need a BMC. You can see where I’m rubbing here

 

Welcome from Middle TN! What's your wheel/tire setup?

 

Did 2 things;

1: Picked up a fresh coat of Magnesium Chloride.

2: Dusted off the plasma cutter and did the BMC.

 

Damn thats a clean BMC!

 

XD818 HEIST
SATIN BLACK
20

Lancaster LS-67 M/T
33X12.50

 

nice and clean... love the 701s... mine are on order

 

Sick truck and I believe that's the cleanest bmc I've ever seen!

 

Today and over the weekend I installed the transmission cooler kit (which went way easier than I was thinking), here in the south I was getting 220F in stop and go traffic, now I'm running between 180 and 210 depending on how heavy I am on the gas. If traffic is smooth at highway speeds I'm running on the 185 range, do huge drop in temps and I love that.

I also installed the front and rear Valhalla cat plates with my TRD pro skid and what a b***h it was, honestly it was way more of a PITA than the cooler...and I never want to take them off bc of that.... however my sliders are due to come in a few weeks.

Lastly, I put on my Wet Okele seat covers and they look ok, install frustration was in between the cat plates and the cooler, lol. They don't look even half as cool as katskinz, but they should do the job.

Oh yeah I will mention I adjusted the color so it lined up after I took this picture.

 

I had the wet Okele seat cover in my f-250. They were ok like you said. To me they didn’t fit as nice as I was expecting for the price.

 

Exactly, if I would have known that I would have just saved up for Katskinz.... So it goes.

 

But they were holding up good though. Weren’t showing any signs of wear after 2 years. I sold the truck with them on

 

Had the Westcott Designs front lift kit installed today, replacing the Coachbuilder shims I’ve been running for a while. It’s pretty cool how much lift you can get from the Pro coilovers with this approach:

 

@FancyPants I know it's a drive but the guys at 88Rotors in Socal do a nice BMC.

 

I've never had them before, but they look like a good fit in the pictures. I've seen much worse.

 

definitely would be a crazy far drive for just a BMC. There are lots of shops in my area that are qualified to do it. Everyone I’ve talked to is about a month out though. Busy building rock crawlers this time of year. So I think I’ll try to sweet talk my Dad (who owns an Auto Body Shop) to help me with it.

 

Did the Viofo A119 dashcam with the USB mirror power adapter. So much easier to leave all at the mirror.



Camera:

$80 VIOFO A119 V3 2K Dash Cam 2560x1440P Quad HD+ Car Dash Camera, Ultra Clear Night Vision, 140-Degree Wide Angle, GPS Included, Buffered Parking Mode, True HDR, Motion Detection, G-Sensor, Time Lapse

https://www.amazon.com/dp/B07SRQH4R7?ref=ppx_yo2_dt_b_product_details
USB Mirror Power:

$33 Dongar Dashcam Power Adapter (12-pin for '15-'23 Toyota Tacoma. Also Compatible with Select Sienna, Honda, and More), Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

Amazon.com: SimpleUSB Mirror to Dashcam Power Adapter (12-pin for '16+ Toyota Tacoma): Automotive

 

Picked up a set of gloss black door handles...

(crooked, yes I know)




Both done..

 

Nice! Where from? Do you know if they are compatible with touch unlock? Really not a fan of the mat black handles, they pick up dust like crazy.