What have you done to your 2.5 gen Tundra today?

Astom22- Can you send me that file too, love to print my own. Also what USB plugs did you buy and how did you wire them up?

 

@James07 you need to put an @ before the name for it to tag that member.
@Astom22 please see above question.

 

PM me when you can get across the border! lol

 

https://www.tundras.com/threads/wha...d-gen-tundra-today.713/page-1862#post-2196866

That should have a link to the files and mine needed some trimming to get a good fit.

These were the plugs:

12V USB Aluminum Car Charger [2-Pack], Qidoe Quick Charge 3.0/4.2A Triple USB Outlet 12V Socket with Touch Power Switch, Waterproof Car Adapter for Car Boat Marine Bus Truck Golf Cart RV Motorcycle

https://www.amazon.com/dp/B08QR9CRK4/ref=cm_sw_r_cp_apa_glt_fabc_85SFBBW035NEG7N1T41Y?_encoding=UTF8

I used a t-tap and hooked them into the stock wiring.

 

I feel like in today's political climate, I might get a knock on the door from "big brother" over these posts.

 

Wanted to see if I can confirm something on these UCAs.

Do they have the zerk fitting on the bolt like the new SPCs?

 

So the ones I received, DID have the zerk fittings for both arms. However there is a long thread somewhere on this board about the Mevotech UCAs, and it is a bit of a mixed bag. Some guys get zerk fittings, some guys get none, somebody even got one arm with a zerk, and the other one without a zerk. And one guy bought the set, but one was incorrect and for an entirely different application.

But when the stars align, they are 100% authentic SPC arms. The ball joints, arms, even bushings have SPC part numbers.

Honestly even if you get the old style sealed ball joints, I would still run them. I'm sure they will last a long time. I live in the rust belt, so I wanted something sealed. I cared less if it has a zerk fitting.

 

Not a bad deal at all.
Thanks for the info!

 

Finished up my under cab courtesy lights and finally had a minute to install my Pop n Lock.



If you’re in the market for the, Pop n Lock, the model

$138 PL8547HD Power Tailgate Lock Fits Tacoma/Tundra, Black

PL8547HD is the new style.
It’s definitely different from the old style that I had on my ‘13.
Heavier, closed in body, different style locking mechanism, heavy duty wire loom, separate connector for tailgate (easier), correct wiring and it’s much quieter.

 

Loader ‘er up and made a trip to the landfill.

 

Decided since I recently changed my side vinyl stickers and painted my brake calipers, along with front shackles to match, I needed to redo my engine cover plus the front tundra badge. Finished it off today with a new license for the front bumper. That’s about it for awhile. Taking her to the RV dealer to pick up new trailer on Friday.

 

Sweet! I was about to paint my engine cover like this! Seen so many with red but I like the blue. My paint just arrived today haha

 

I installed my half console safe, cut up my old console organizer and installed the rough country speedometer calibration thingy. I got it within 1-2 mph, I am sure I could fine tune it more but I am not going crazy with it

 

Installed this rear seat dual outlet thingamajig I got from @Chelly. The dual usb is from sparks. Fit is perfect.

 

I found using pin striping tape is more forgiving around corners then painters tape. Good luck and post a pic when you’re done!

 

Looks great! I have my part from @Chelly just waiting for FedEx to deliver my Sparks order so I can get this and the wireless charger installed.

 

Pretty happy right now just finished installing my driver's side grab handle, man that was easy.

 

I have mine. I just need my LunaRock Pro!!

 

Big question. Right or left for usb???

 

Added AJT blackout kit for the console.

Also Plastidipped the chrome piece on the bottom of the shift knob and shrink wrapped the chrome shift lever.

Still need to do the climate control knob surrounds. Will do when I install my FRAC harness for the front camera. Polished chrome has got to go!

 

Ah. So you probably go pretty much everywhere.

How about "ATM Transport"?
Asphalt To Mountain Transport

 

Used it for a squirt gun and water balloon fight.

 

I went both!

 

Love that DiamondBack - wish I had gone that route.

 

We might need to get you some more Mario stickers lol

 

So does that become the banana peel?

 

Very happy with it. So much better for me than the tri fold it came with.