***SOLD*** READY LIFT 3"F/1"R SST LIFT KIT - TOYOTA TUNDRA 2007-2021 NEW PRICE $65 SHIPPED

***SOLD***


3"F / 1"R SST LIFT KIT - TOYOTA TUNDRA TRD / SR5 / ROCK WARRIOR 2007-2021 READY LIFT.
Fit up to 35” tires.

Front strut spacers only used on my truck for 500 miles.

Rear blocks and bolts never used brand new

https://www.readylift.com/3-f-1-r-sst-lift-kit-toyota-tundra-trd-sr5-rock-warrior-2012-2018.html

Missing:
Diff drop spacers
Sway bar spacer
Skid plate spacer(not necessary)

These items are easily source from the manufacturer or you can cut them yourself.

https://www.readylift.com/tundra-trd-pro-skid-plate-spacer-kit.html




.

Link to missing parts from manufacturer. Could be sourced for less. $49
https://www.readylift.com/tundra-trd-pro-skid-plate-spacer-kit.html

I’ve circled parts actually needed.
Bolts can be found at most hardware stores.
Spacers can be made or sourced inexpensively online.

 

Their website says it doesn't work with the TRD Pro Fox setup?

 

No strut extension block lift kit works with the trd pro.
It’s already lifted.
You can only use shims.

I’m trying my best to understand why you would want this kit on a pro.?.?.

 

I have those missing parts that were never used on mine. If you get a buyer for your kit, send them my way if they want those parts. I can get them out and take pics this evening. I'm pretty sure I have everything.

 

That’s killer!
Thank you, George!

 

Op, what did you replace from this starter kit??

 

Leveling for one thing, but I'm also considering going to 35s. I've spoken to a couple of shops around here and apparently the OEM Fox suspension requires a RL SST kit.

 

Yes, that is correct.
I would go with coachbuilder shackles and shims for that.

 

What did I put on my truck?
Toytech Boss

kit is original except for the missing items that @Tundra234 said he has available.

 

Interesting......this was not in the immediate plans, but so tempting.....

 

Ha!
C’mon.
Grab those n-fab steps too.
You’ll be set!

I’ll even load it all free of charge.

 

Haha. I also looked at the steps. Been interested in wheel to wheel steps. I drive a DC though. I don't think it aligns, but I'm wrong about a lot of things. Maybe someone smarter than me would know.

At 3", that puts it right at them limit before having to change UCAs correct? I'm not familiar with lifts, been reading up. I've noticed a lot of people mention changing UCAs once they go higher than 3

 

Not sure if the steps would work on a DC.

Yes, you’re good to go with oem UCAs.

 

$65 shipped bump

 

Pm'd

 

***SOLD***