What have you done to your 1st gen Tundra today?

So you want to put OEM green on the right side switches? I don't have those but could do it.


I only have the volume side. Wouldn't mind the Bluetooth side for my truck eventually.

 

Oem green ideally yea. I’ve got a color scheme going... trying to hunt down a Prius mirror switch too just to have that illuminated.. I’ve got white for a majority but with green accenting lights. And once I have the CarPlay radio I’ll have a radio that’s green and white.

 

I know not of this one-piece fob. What is it? You got a link?

 

If anyone is planning to replace their LCAs, I've got a new OEM Driver Side I don't need.
Would sell for a discounted price.
48069-34040

 

Both of these work on my 2006 DC...

https://www.ebay.com/itm/Upgraded-R...2004-2005-2006-HYQ12BBX-HYQ12BAN/292670009134

https://www.ebay.com/itm/SWITCHBLAD...KER-BEEPER-ALARM-REMOTE-FOB-BXD2/361996936927

Here is a link to the DC programming instructions....

https://www.tundras.com/threads/key-fob-replacement-2002-tundra.55779/#post-1479886

 

Look up

 

Link above as I'm sure you've seen by now.

Personally, I didn't like it...the fob was too bulky (to accomodate the flip mechanism) for my liking. I much prefer the one with the fob in the key head. I used the flip one in this hide-a-key on my truck. Damn this is so magnetic I can barely get it off...

https://www.ebay.com/itm/Magnetic-H...ash-Box-Under-Vehicle-GPS-Holder/282309033775

 

LOL deleted my comment, jumped the gun before I got caught up on the posts

 

My apologies for the rapid posting. My brain is pretty fried after a night at work. Was happy to come home to a package at the front door this morning. Got this rubber bed mat. They popped up on Amazon pretty inexpensive with shipping so I pull the trigger. Really nice piece of kit.

 

I have one of these as well and it's nice but be advised they will trap moisture under them. I have to pull mine back occasionally and address rust speckles that start to form on places where the paint has been scraped off the bed.

 

Gave the front end a solid torque down since I've put two good trips on it since doing the install. Two of the LBJ bolts were less than an eighth of a turn loose. For the record, I used red Loc-tite on 'em. Also got around to putting in new sway bar bushings. Hose clamps on the tie rod boots are holding up well. After looking at the oil lines on my shock shafts, I might experiment with putting some spacers on the bump stops for good measure.

 

Good to know. Still planning to do a spray in liner under this, so hopefully I'll get to it sooner rather than later...

 

Is yours a double cab? Link to the mat?

 

Might just give my first born if I could find that one....hard as hell to find E1/E0....dark brown or tan

 

More about what I’m about to do... got the new MagnaFlow Cats! What a joyous day it’ll be when the CEL turns off


And JBA short headers coming in about a month as well. Pretty excited!

 

Added new WeatherTech floor mats. They both fit fairly well, but the loud pedal definitely hits the floor mat at full compression.

 

Reviewed some pics today and Chief Eagle Eye let out a small Sadz Rain Drop. I saw I missed an additional chaffing going on at the O/D Wire last week. Trimmed a small chamfer on the plastic bracket and taped her up. No wire damage, but did cut most of the way through the jacket. A save!

While the Great Xacto Knife from Trailside was unsheathed I processed some Organic Graphite Shavings out of pure blanks to ‘Dry Lube’ the Ignition/Door Key Cams. Works!

 

This is me every single time I hear/read those two words together....

 

Took the Topper off and pulled all the windows out so I can replace the seals, they were really leaky. Decided to sand it down, repair some cracks/chips, and hit it with some raptor liner while it was off. Much cheaper than color-matched paint, and came out pretty decent. My chrome rear bumper was dented and the chrome was split in a few places, so I hammered out the dents and ground down the chrome, and hit it with the leftover raptor while I was at it.

 

yep, it’s DC. I got it off Amazon. If you keep an eye on it, it’ll pop up for sale around $90 with prime free shipping every once in awhile.

$149 Westin 50-6245 Black Rubber Truck Bed Mat fits 1999-2006 Tundra (6.5' Bed)

https://smile.amazon.com/gp/aw/d/B00F6XAPNS

 

X2, more details please!!!!!

 

Loud pedal?

 

The rumble pedal. Skinny. Go fast. Yeetus.

 

Brian - Is that the Dee Zee branded bed mat ?

 

Oh, gotcha. I used to get a kick out of how my gf would try to hit the “phantom” clutch pedal whenever she drove my truck since she’s used to driving a standard.

I shouldn’t joke about it though since I learned how to drive a stick test driving new Tacomas at the dealer. They really loved me.

 

Do you have link for mat please
Thx

 

Today I covered the drivers seat in a layer of my hair remnants.

 

I didn’t know you had a wig kink

 

Decided to change my air filter today. Old one below looks like it’s about due.