295/70r18 on Stock SR5 w/TRD Pro Rims

I put them on this weekend and had to remove the front flap and modify the rear flap. No way they would fit on my 2020 I have a Rough Country 3/2 level kit also.
So yea I agree with you.
It's cray how from truck to truck it can be so different

 

I’m rubbing on sway bar as well with Pro suspension and Westcott design lift on 285/75R18 with Pro wheels. I have duratracs that are a legit 35.1” tires.... would dropping down to a 35X12.50 or 295/70 eliminate rub since they are around 34.5” tires??

 

Just got the exact same thing done on my 2021 stock SR5. I can confirm this fits well without any modifications. I also have the TRD skid plate and no rubbing!

 

Not too many doublecab pro's in this thread with 295s, so here are some pics. Went with the Falken Wildpeaks based on some good advice here. Impressions so far:

- Smooth, but def more firm
- Not much noise on the freeway, like I didn't notice any difference. This may change with more miles.
- Ride comfort-wise, I can tell they are new tires but the delta from stock is not big at all
- Just took a spin around the neighborhood and no rub whatsoever at full turn going forward. Still need to test backing up at full turn. (I removed the front mud flaps prior to install)

Overall happy with them. I was nervous about the swap but feel better already. Gas may take a hit...meh it's already not great.

 

Thanks for the post. As a double cab owner myself, I feel like for every 8 CM owners out there, there are only 2 DC owners. In other words, trying to get a good use case / feel what a DC will look like with larger tires is hard to come by.

I’ve slowly upgrading mine to be able to run larger. Just got 6112/5160’s, CB shims, CB shackles and CB front bumper spacers on the way. Where I’m stuck is if I want to run 35/12.5/18, 295/70/18 or 285/75/18.

Nonetheless, your 295’s look great. Would love an update if you do have rubbing after more (reverse) testing.

 

I just realized that I posted this in the wrong thread...meant to post it in the 295/Pro thread. Oh well, glad it was helpful

 

@Jembalayah did you swap on a TRD Pro skidplate or is it the stock skid plate.

 

This thread has been helpful...

I currently have the trail wheels (same dimensions) with 275/70R18... good to know the 295 will fit on a stock SR5 with the same wheels.

Looking for thoughts/feedback... I picked up a set of Ray10s from SCS. +25 off-set - anyone think I can still squeeze them in there?

 

CoachJ -how did the new wheels turn out - thats exactly what i have !

 

They turned out great! I love them and the feedback from others has been positive...

 

295’s??