SCS SR8 wheels 18x9

What is your lift set up?

 

Lifted about 3.25" in front (Fox 2.5s) and 1.5" in the rear (Deaver 748s, Camburg shackles & ADS bypasses). I also ran the same tire/wheel combo with Bilstein 5100s front & rear with Toytec shackles set at 1" (5100s were on the middle setting with 1 CB shim on each side.)

 

Perfect, thanks!

 

I have a 2020 1794 Crewmax and this is exactly the setup I am going with. Did you have to do any trimming with the 295/70/18? Any major rubbing?

 

The pic in the post you quoted shows that the mud flaps have been removed, and that is usually an indication of some pretty solid rubbing. I have 275/70R18 Wildpeaks on +25 Ray 10 wheels, and I have rub. The tires are about 33.4", so anything bigger than that is definitely going to require trimming/adjusting to fit.

 

Yup, no way those suckers aren't running with stock suspension.

I recently found out, each truck is different even if it's the same truck. Some guys were saying my setup wouldn't rub....but they rubbed.

 

Most don't take in all the variables. Even tires stamped the same size will be different from different manufacturers. That's what I ran into. I went with this size because another member had Ridgegrapplers and no rub, but my wildpeaks are about a third of an inch taller. I have rub and he didn't.

 

Wildpeaks here too.

Only had them on since Saturday but love them. The lugs are incredibly deep.

 

I quite like them, but they do run large.

 

If there’s no 17” F5 happening, how about an 18”? That’s my favorite SCS wheel. Would love a 5x150 F5 for the Tundra. Bet I’m far from the only one.

 

I have a 3.5 front lift and 1.75 shackles in rear. I took off mud flaps and have minor rubbing on a 3/4 reverse. Just barely

 

do these available in 0 offset?

 

Doesn’t look like they have 0 offset according to their website.

 

Are the bed lock bolts removable? And is this a fake simulated bedlock? Wondering if I can paint the bolts red.

 

Yes, the bolts are removable and this is a street wheel. Beadlock wheels would be about twice this price point so that's how you can always tell

 

Thanks for verifying. This is the setup I'm lookin go get. Is this good to go? Planning on putting these on 2021 Tundra TRD Pro with 295/70R18 tires.
And are the beadlock bolts also Gunmetal on this color?

 

Some trimming will be needed to fit a 34" tire, but it definitely can be done. The bolts are bare stainless steel.

I don't recall this exact setup, but this is with 295/70/18 tires.

 

Truck looks great. Would look great with some F5s, too!
Any chance for F5s in 18"?

 

It will either be the F5 or our upcoming Gen5 model. We shall see.

 

The stack of items is growing and I don't even have the truck delivered yet. Just the way I like it.

 

Pulled the trigger today. Can’t wait to get them!

 

Nice...you made a good choice!

 

Are these ever coming back? Just got a white Tundra that would love a set.

 

Man those are nice!!

 

Mine are supposed to arrive Friday - if they can pull off that shipping in 3 business days to MT that is really something.

 

Big thanks to SCS for designing the wheels to fit the TRD center cap. Trying to keep it TRD equipped. 295/70/18 Toyo Open Country AT3

 

Unfortunately, that color combp is not coming back.

Sweet looking Tundra!

 

And so it begins

 

Wheels showed up last week and got the tires mounted and balanced Tuesday

 

Very eager to see these installed on your rig!