Offset question

Hello everyone.
Looking to get some Methods MR305 NV for my 2020 tundra. Would a 0 offset or 25mm offset be better? My apologies for the noob question.

 

Depends- running stock suspension or lifted? Tire size?

Stock wheels are +60. The more negative offset the more the tires stick out from the truck. With a 0 offset your tires could rub the body mount. 25mm is a good middle of the road and a popular offset used by many- offer more clearance than stock for the UCA but usually does not cause rubbing on body mount, but again, that depends on the tire size.

Check the stickies in the wheel and tire section on this site. There is some good info on wheel offset, what tires fit stock/lifted, etc.

 

Truck is lifted 3”. Will be running 285/75/18

 

fitting 285/75/18s has been discussed a lot. Search and there are some threads. Here is one-https://www.tundras.com/threads/anyone-running-285-75r18-on-stock-trd-pro-tundras.69040/

And so you know, the Pros are 2 inches higher in front than regular Tundras, so very close to what you plan do do.

 

Thank you for the help bro. Looks like it’ll be the 25mm offset.

 

Get +25 offset. I have same wheels. The tire and wheel offset what will allow clean fitment or rubbing.

 

Wheels and tires on order. Got the 25mm offset

 

Would you have pictures of your truck with the wheels?

 

The only picture I have at the moment. If you want more of different angle let me know.