Are stock wheels going to work?

So I’m planning on getting the rough country 3.5 lift with the new uca. My question is will my stock wheels work with the lift? Going to just upgrade the wheels and tires later on if I can. I attached a picture of the wheels it came on. I just for the life of me cannot figure out if they will work or the actual wheel dimensions.

https://www.roughcountry.com/toyota...6720c.html?find=2013-toyota-tundra-2wd-737982

that’s the lift

 

Should work fine. Stock wheels may limit your tire size somewhat, but you can run that lift and stock wheels/tires.

 

As long as the lift doesn't have a disclaimer that it won't work with the stock rims or back spacing it will be fine.

You can check multiple sites if needed with that lift to see or reach out to rough country an ask if there is clearance issues with the stock rims.

 

That's what part of the problem is, I cant exactly find info on the stock wheels to see if they are in the specs of what is recommended for the lift.

 

Well the plan was to just do the lift and when the tires need to be replaced just buy new wheels and tires when that happens.

 

Check custom offsets website in gallery to see if every thing would work. The normally have good info also find the same lift on there an look at specs.

 

What tire do you want to run? A 3.5 inch spacer lift is too big imo, it’s going to ride like crap

 

This will work with your stock tires/wheels but your not gonna like the way it looks.

 

not gonna lie... I didn’t realize it was a spacer lift with different shocks till you said that... touché on that one.