What have you done to your 2.5 gen Tundra today?

Haha sounds just like mine, knows me too well to trick, especially the F off part lol.

 

Finally had the fronts tinted

 

Installed this 6 relay switch control panel on my console. I'm very impressed with the build quality of this kit, especially for $130. It was a tight squeeze to mount the relay control box under the hood of my 2020 double cab, but it fits! I like how the buttons feel and the case is metal, which just feels sturdy. The under hood portion has a separate relay and fuse for each button. I brought the control cable into the cab via the rubber nipple under grommet on the drivers side. Only the rear lighting is hooked up on my bumper so far but, expansion is in the future.

Amazon link:

Primelux 6 Gang Switch Panel Automatic Dimmable Universal Electronic Relay System Circuit Control Box On-Off LED Car Switch Panel Button Switch Touch Switch Box for Truck Boat Marine ATV SUV Caravan

https://www.amazon.com/gp/product/B08J82GDTP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Yeah I have a cheap Auto Geek foam cannon. I’m using Chemical Guys Mr. Pink. Love how frothy the foam is and the smell!

 

Snagged some RW wheels, mounted some Cooper AT3 XLT’s, and refinished the ring and painted them a shadow metallic. Figured something a little different from the usual black ring. It’s growing on me.

 

I installed my Charvonia's too - must a been the day to do it. I had them for months but stripped the bolts. I'm an idiot. I stripped the first one so I went to the second. Stripped the second, swore, and went to the third. Stripped the third, swore a little louder, and stripped the fourth. I've been pouting for a few months until today and I went at them with some vise grips. I should have used the vise grips in the first place.

 

Rock Warrior wheels look sooo good on all model years! But even better on Black!

 

Thanks! Yeah, I was a little weary about painting the rings that color, but we’ll see. May just get them PC’d gloss black after all.

 

They look good dirty too!

 

Dude same thing happened to me and I snapped one bolt but got replacement screws from the seller. Very nice guy. I used a 1/4 to 3/8 adapter and a extension on the ratchet for a better installation using the smaller ratchet gave me problems.

 

Finally replaced the factory knobs and rings.

 

Just installed Toytec 1/2" front bumper shims and no I didn't take the grill nor the bumper off for the install. And the bumper came out straighter than your Wang (no more rub at full lock).

 

@butch2427 I saw these on Amazon and was thinking about getting it. So the install was easy? Let me know how this works out for you.

 

Yeah, the seller is great. Those factory bolts were just weird. They stripped immediately and I tried to do the screw extractor thing on them and it just stripped them more. I had looked back at the thread a few weeks ago and saw that somebody had asked what to do if the factory bolts strip - somebody said to use Vice Grips. Glad I saw them. As a bonus, I have a brand new set of Vise Grips. It was just a win all the way around.

 

FINALLY finished up my front camera!
Also got my screen protector on my head unit screen, installed my AJT vent trim rings, and dropped off my tomahawk shifter to get cerakoted. Details on the rest of the camera install will go up in my build thread a bit later...I need to get some work stuff done and have a beer.

Those cap screws are "black chrome" and I'm just using them while I wait for some proper black oxide finished STAINLESS cap screws to arrive.

 

Any words of wisdom so i can achieve these exact results?

 

You should start with Kegel exercises...

 

Remove the 2 side screws from the liner so you can move the bumper out 1/2" freely. There is a youtube video on how to install without removing the bumper.

 

Im gonna need a lot more than that big boy..but it’s a start.

 

The torq bolt I had to use a flathead screwdriver and hammer to notch a flat spot and unscrew it that way. The oem tie down screws were never my favorite but a new vise grip is a plus

 

Two hours and a few choice words in to my lift install and I still couldn't get the lug nuts off. So I gave up and now have a stripped lug I'll have to go to a tire shop to have them get off. Oh, I'll need to order a couple new lugs too.

 

i love my foam cannon! Forgot to snap a photo last weekend.

 

That's crazy. It is bent

 

mine was bent also....on the passenger side rear.

 

This RWs are looking bad ass!!

 

Hard core member of the club!

 

Lefty loosey righty tighty

 

49000 mile mark on my 2016.

 

Yours is still green. My 2016 is close to hitting 99k. I'll try and remember to get a pic when it does.

 

Yours may be the first with the rear corner bent.

Damn!

You win!