What have you done to your 2nd gen Tundra today?

Like your wheels, what are they? What tire size are you running?

 

It finally stopped raining in the PNW for longer than 4 minutes so I got around to installing some things I've had sitting around. Easiest was the short antenna with a little trd flair and then the DD 8" exhaust that I bought off a local member. Finally tore the dash apart for a new head unit and threw in a front camera to go along with the head unit. Have yet to put the resonator on the exhaust so I will see what the difference is with that installed when I get around to it eventually.

 

They are BMF DRT's in 17's and im running BF Goodrich ko2's in 315/70/17's. Currently the truck is on bilstein 5100s on the top setting with a coach builder .25 spacer on the drivers side

 

Reply - I bet those pipes sound great!! And that new HU looks like it was OEM!! Great job.

 

Oh ya!! The start-up sounds so mean now. And I found a head unit on Amazon that did not need a dash kit because I wanted it to look factory

7" Android 9.0 Touch Screen Car Stereo DVD Player in Dash GPS Navigation for 2007-2013 Toyota Tundra/ 2008-2013 Toyota Sequoia Support Bluetooth/WiFi Hotspots/4G/OBD2/DVR/AV-IN

https://www.amazon.com/Navigation-2...ds=7in+tundra+head+unit&qid=1610736254&sr=8-4 and another plus is because it is built for the tundra it was 100% plug and play into the factory harnesses!

 

Went in for a State Inspection. I put 1200 miles on my Rig in 2020.

50,936 miles on my 2007 CrewMax. It's almost Broken in. lol





O.S.T.

 

Installed my new Hooke Road Rear Bumper

 

Last of the chrome gone!
Lug Nuts...

 

Nice. Any plans on trying to adopt the later-version trailer plug so it's next to the license plate? I remember trying to research this months ago, but it wasn't trivial or low cost.

 

Thank you. I have been pondering the tow harness situation since I got it on...have any links on where to start?

 

I just realized you have a build thread. I'll move on over there.

 

Ok so I feel I’m pretty savvy working on cars and trucks been doing it for almost 20 years but the bestop nx power boards got me !!! Anybody else have them and installed yourself ??? How did you initialize them ? I did exactly like the instructions said and I get nothing this is my second set I got from them. I fed up with these boards. Sending this set back and just gonna bite the bullet and get a set of Apms

 

Try this thread if you haven't already, there are others that have them there https://www.tundras.com/threads/bestop-powerboard-electric-steps-anyone.78323/

 

Debadged the truck today. It is much faster. Has anyone else experienced this phenomenon?

 

@ViktorG's truck is so fast that the badges removed themselves...

 

Did this yesterday.....now just have to find good flat spot to adjust, they do need adjusting....Ive never have a flat driveway.....

 

no kidding lol. Womping on everyone at the tracks

 

Man that is dope!!!

 

What grill is this?

 

$180 EAG Replacement Upper Grille Front Grill with Amber LED Lights Fit for 10-13 Toyota Tundra - Charcoal Gray

https://www.amazon.com/EAG-Replacem...ywords=eag+tundra+grill&qid=1610929062&sr=8-4

 

Thats looks badass!!

 

What headlights are those?

 

@MTRock got me going. I was going to copy his but mind got the best today me. Plus the sub I have kicking around is a 12” that requires .9-1.1 cubic feet in a sealed box (chose to not go ported to save box size). Here’s what I ended up with. 1.09 inside volume, minus the sub magnet and basket should be right near 1.0 cubic foot volume. I never have a 5th passenger, and if I do, they can straddle the box. Was dark by the time I wired the amp in behind the seat. Just need to tie into the head unit tomorrow for some thump. I’ll bedline it at some point haha.

 

Morimoto XB Headlights, matching Fogs

 

Added an ARE CX topper and some nerf bars that a local guy was giving away due to rust. Ground them down and repainted one and they look brand new.

 

BOOOMMIING!

Well done!

 

Thanks, I’m curious on the sound, it must be better than oem!

 

Got this cap after weeks of searching. For $300. Had to drive 3 hrs away.

 

Nice score! The cheap ones are out there if you're patient.

 

I’m no carpet guy, didn’t have or buy adhesive spray so I just stapled it on. It’ll do. Looks way better than raw. Also added a spacer strip to the top for excursion room. Excuse the mess of two small children and a dad who doesn’t clean it up.