What have you done to your 2.5 gen Tundra today?

Can you link the install video? I put my OEM cover on my son's 2013 and we've had issues with it leaking.

 

Small mod: install a 8mm led tap into a near light bar switch.. good amount of light not it’s too bright just right

 

Nice! Adding this to the "when the dash is all torn apart" list!

 

That's a great idea for a thread all by itself!

 

A man called Jayne. Shiny

 

Took her through the car wash and got the salt off the underfluffies. Even washed my shit-assed work Chevy too.
The woolwax appears to be doing an awesome job keeping the rust at bay so far and sticks like hell even after driving through the salt spray and doing the car wash blasting.

 

I just ordered the usb led lights but like this better. Where’d you get the led?

 

mxuteuk 3 Pcs White 12V-24V 6mm 1/4" Metal Indicator Light Head Waterproof Signal Lamp with Wire for Car Truck Boat DQ6P-12V-W

https://www.amazon.com/mxuteuk-110V-220V-Indicator-Waterproof-M6-110P/dp/B08KFX6DDL/ref=mp_s_a_1_57_sspa?dchild=1&keywords=8mm+led+indicator+light&qid=1610391329&sprefix=8mm+led+in&sr=8-57-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE2NTk5RFZSTDc2UEomZW5jcnlwdGVkSWQ9QTA2MzEzNjgzREw0SDZJVlhSSDJMJmVuY3J5cHRlZEFkSWQ9QTEwMzI5OTIyNEdKNlQ0N1BXUkZLJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0Zl9uZXh0JmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

 

Thanks. My Infiniti had a small led light overhead pointed down towards shifter and cup holders that was always on and I didn’t realize how much I liked it until I got the tundra. It also had hidden ones pointed at the window switches.... may have to do something like that we these

 

Yeah, I’m right there with you. My wife’s new 4Runner has it up top and would like this as well. My only reservation is being too bright. But that just me. Factory always seems to be tasteful ( not saying this isn’t haha... obviously because I want to do it )

 

Maybe I’ll try to get the factory piece from the 4Runner and use that. I’m aso worried about it being too bright. Factory is usually the way to go when possible.

 

@Do58 is this the led?

 

Wife at work with her truck for me to look. That being said, I’m 99.9% sure that’s it.

 

The phone locations are new to me, so I decided to put these vinyls on to help me until I get used to them. The little things that make us happy!

https://tvdvinyldecals.com/collections/tundra

 

Debaged the Tundra. Left the Iforce only. Not sure why yet, see how I like it.

 

Thought about doing this as well but I just ended up ordering black emblems this morning.

 

I used this 1W 6mm blue LED and it seems to provide just the right amount of light. Could possibly go up the 3W but it would be overpowering and didn't want to spend time putting in additional resistors to bring it back down.

 

Good to know. Did you put the lid in the usb area and did you have to use a resistor ( if so please elaborate if you can please ) or just hook up up to power? Any pics by chance of your install?
Thanks

 

It all looks great!!!

 

I put it in the overhead console similar to what you would find in most vehicles. It allows for a wider area to be lit. No pictures of the wiring but its pretty simple. Drill a hole to install the LED bolt. I did put in some small connectors so that i can remove the overhead console with the LED bolt attached. Ran the wires along the headliner down the A pillar to where the switches are located. For power, I tapped it off the same wire that illuminates the switches so that it will come on when headlights are on. So you could also do this in the USB area if you wanted.

 

@danz75 this is exactly what I’m looking for. Did you do lens or no lens? And if it’s not too much to ask, so you have a picture of what the shifter area looks like at night with it lit up?

 

The charging system on the truck does not charge the AGM batteries as high as they like to be. You probably don't have to charge/tend it monthly or so like I do, but I just want this expensive battery to last as long as possible so try to keep it happy

 

I went with the 1W so it has a lens. The 3W does not have a lens but i was worried it would going to be too bright. FWIW, I used two white colored 3W bolts in my previous 5th gen 4runner to throw light in the cargo area and it threw an obscene amount of light (but it was ok since the factory lighting was very poorly designed). I could possibly add another 1W to make it slightly brighter and symmetrical but I don't feel that its necessary right now. Color would also make a difference as to how bright it is.

Since its meant to be more of an ambient light, it really not super bright. I'll see if i can get a decent picture tonight

 

Also, I have a bench seat so column shifter instead of floor shifter but it still works fine for throwing some ambient light in the general area.

 

Thanks for the pictures, how much woolwax did you use. I tried for the first time last week and used half a bottle. Seemed to cover but I I don't really know if that's enough.

 

I used about 3/4 gallon

 

My iForce badge lasted less than 12 hours after I took the rest of them off.

 

Damn. Looks like I have another coat to apply. Thanks

 

Hopefully this shows how much light is being thrown by the 1W LED bolt.

With foot well light on.


Without footwell light on.


Without footwell light on and blue LED bolt covered.


I also installed the 1W LED bolt in red by the switches as an indicator that will illuminate if my tailgate was left down.


You can tell how much brighter the red is compared to the blue.

Hope this helps.

 

@danz75 perfect. Thank you so much.