Tundra grille LEDs

bad ass truck

 

did you modify those grille lights your self?

 

Give us the details, close up pics etc. Those look great!

 

Yes. Cut it using dremel and cut off wheel. I also made my own custom brackets. The lights don't mount to the grill. The lights mount to the custom brackets and to the radiator front core support. I had to flip the horns around for clearance.

 

Parts are in from Vleds! Time to start my Yota leds” project! Who needs raptor leds when u got Yota!

 

Bumping an old thread. I'd like to know more about how you physically mounted these lights in your hood bulge!

 

Pretty easy except you have to drill a hole to put the lights through.

 

Yes pretty simple. Used a drill to punch some holes in the plastic bulge insert and used the pod lights with flush mounting kit. Just be careful when your drilling so its not too large and the spacing is right. I sort of have OCD so had to cut small pieces of white paper and tape them in place before i drilled so i could step back and take a look. But is one of my favorite mods and simple to do. worst part for me was getting through the fire wall and mounting the button in the center console under the HU.

 

Anyone take the new honeycomb grill and put two round lights in using the same thought process as @King R 808

 

Do you have a link for these? I got some on Amazon that were cheap. Already replaced 3X I’m over it!!! Helppp

 

Here ya go. Also used the flush mount kit for each and needed to get extension wires and things to mount in the bulge correctly. I can type up a parts list I used if needed. Might be a little more expensive than things online but it's been over a year and nothing has gone out. Plus they have a good warranty.

https://www.vleds.com/shop-products/pod-lights/pod-3-w-5-5k-c.html