Rock Warrior club

Wow, thanks for answering! Hoping the lug nuts work but now considering locks since these wheels are so hard to find. Thanks again

 

If you get OEM locks be careful..no power tools with the locks! It will break them out!

 

Thank you very much!

 

Your lug nuts won't work with the RW wheels if they look like this:



You will need a set that looks like this:



Spline drive, 60-degree conical seat. https://parts.toyotaofcoolsprings.com/oem-parts/toyota-wheel-trd-wheel-installation-kit-ptr2760110

 

Don’t use OEM locks, the keys are garbage! I broke my key (by hand), and they are impossible to replace. I had to hammer sockets on over the locks to get them off. A motivated thief will get past them, but they are a huge pain in the ass if they break on you.

If I’m not mistaken, your stock lug nuts won’t work. You need spline drive M14x1.5 cone seat lug nuts. The holes are too small for your stock lug nuts to fit.

 

Thank you all, I have a 10am appointment at pep boys. My steel wheels have the regular lug nuts that @EDDO pointed out. Hopefully they have the lug nuts in stock or I may need to wait till I find them. But at least I have the wheels now and I already purchased the tires.

 

Also ask the shop about the TPMS sensors. Alloy wheels use a sensor that is different than the ones in your steel wheels.

 

Ahhh man, the great deal I picked these RW wheels are sounding like they’re gonna start costing me lol. Thanks

 

Gonna look good though!!

 

I know everyone likes Black wheels on everything but I wanted something different and have actually only seen one RW in person. And it had these gunmetal wheels that stuck with me. Guess I’m gonna be a RW Wannabe lol

 

Cant wait for mine to get in! The fogs came yesterday but the headlights wont ship until the 6th I think. How do you like them?

 

Anyone know the TPMS part number? The TPMS sensor off my 2018 steel wheel doesn’t lay flush against the RW rim. A search while I’m still at Pepboys showed
42607-33011 but this was from guys with Landcruisers and it looks like this part fits a lot of models. Kinda lost here and hitting snags at every angle including tracking down new lug nuts. Any help would be appreciated and thanks in advance!

 

This guy will help!

@Roman

 

42607-0C091

 

Thank you, so that part is for my year Tundra but I believe the wheels are off a 2011 or 2012 RW. Compatible for that older wheel too? Thanks again

 

Yep. I’m running the stock ones from my OEM Off Road wheels in my RW wheels. 2019.

 

This might be insane...but here goes,

My 2013 Double Cab is closing in on 100K miles so I'm sure its getting close to needing a shock change. I'm really interested in a lift (ok maybe a smidge of front levelling) but do want to maintain the current ride quality. Do the TRD Fox Pro's work on the 2nd gen's or just the 3rd gens???

 

Following along, I've been curious about this myself.

 

Yes, direct bolt up.

 

LOL I was afraid you were going to say that

 

Absolutely love them, they've made a tremendous difference in output over the stock halogens. It's also done a nice job of freshening up a 7 year old truck to look quite a bit more modern. I added a set of Diode Dynamics SS3 PRO fogs (in yellow) to it as well since this photo, the light throw on those is OUTSTANDING!

 

Gotta say thank you to all members of Tundras.com! For the advice and ideas!

My wife hopes I’m done!



Sure would be nice to have those SS3 pros though!!!

 

Looks sharp! I debated which fogs but decided to go for the matching Morimotos for that stealthy look. The quality seems great, I can not wait for the headlights to show up. I have been debating the Sequoia grille as well! I just cant figure out if the gap would bug me to much though

 

Sequoia Grille gap is 1.29 inches..Significant? But you’ll be the only one that will notice it!

 

I'm now a RW look a like. Pep boys literally had my truck for 8 hours. I still have to go back once I source all my TPMS sensors. I'm running Cooper AT LT tires 285/70/17 in load range E. They're pretty stiff, I'm hoping its tire pressure. But my air gauge just died and I can't check the pressure. What is or was the tire pressure you RW guys were using on that size tire? Thanks for all the help!

 

Good lookin truck for sure need to delete some chrome though before you’re a true RW imitator

 

Thanks, well they say imitation is the best form of flattery. This is my real Rock Warrior (2004 Jeep "LJ" Wrangler) that took all my money and makes me leave all the chrome on the Tundra. Lol

 

Yeah Jeeps will do that

 

2012 just thought I would share.