What have you done to your 2.5 gen Tundra today?

Nothing big, but a wash and wax, and then this little number on the grill.

 

Which system did you go with 6 or 8? Hows the sounds/loudness?

 

Installed bed tie downs - found some with a slightly bigger hole in them that didn’t require boring out the hole. Decided to put them on top of the washers, which turned out to be a bit of a chore since the washers are “captured” but managed to use an old dull hole saw as a sleeve to push them off (and get them and the anchor back on).


Also put one of two window stickers that I plan on installing. I’ve been with them since ‘97 and my blood runs pretty green at this point. This one I’m sure gained me at least 1HP.

 

Installed cement front bumper caps

 

Check the sway bar.
Real east to spot, especially if you have the red TRD.

**EDIT - Nevermind. I saw your other post about the skid.
FWIW, I had the same issue a couple years ago with my 35’s. Was the sway bar.

 

Done over this summer. Had front and rear chrome bumpers blasted and painted to match. Bought painted black door handles and had those painted to match. Windows tinted and tint strip on top of windshield. And fully cleaned and waxed for winter when i took this picture on yesterday.

 

Installed new ruff tuff seat covers, very happy with way it turned out.

 

Started the de-chroming process today: mirror covers, emblem covers, and black vinyl for wheels. Not much, but it's a start.

 

Just replaced my rear seat 12v plug with a dual-port USB charger.

 

Nice! I used one like that and replaced the front plug. Actually use the back 12V one for a small inverter.

 

Rust inhibitor DIY with Corrosion Free Rust Cure 3000. The first 2 hrs was therapeutic before my ADD kicked in.

 

Installed Waterport drop bracket and bed rail mount. Not impressed with the lack of clear instructions and missing hardware. Got it done though.

 

Nice! Just had mine delivered yesterday but was told it’s going under the tree for Christmas.

 

What was the fix?

 

Looks Great, really like the fit.

 

Installed these new puddle or are they called rock lights (what’s the difference, can someone tell me?) to match the footwell lights. Connected them to the same line as the footwell and makes seeing the step up a little easier.

 

It is. It is well made. My only complaint would be that it is a little thick (sticks out a bit) but it’s not horrible. There are others that are not as thick but I am not sure how well they are made.

3 Tri-color Front Grille Badge...

$19 Tri-Color Front Grille Badge Emblem for Tacoma 4 Runner Tundra Sequoia Rav4 Highlander（Yellow/Orange/Red

https://www.amazon.com/dp/B08FTB18XF?ref=ppx_pop_mob_ap_share

 

Drove it around Windrock with some other Toyota's

 

What bed lights did you use?

 

Nice.....gotta love them ya know!

 

I went with the 8". Its mellow until you get on it. The 8 seems to be more popular than the 6. Its a nice clean sound. No need for the resonator.

 

The picture doesn't do it any justice but I swapped out the interior bulbs with LEDs from CaliraisedLED. It is CRAZY bright and the picture gives it a yellow hue but it is bright white in person.

 

Blacked out exhaust heat shields

 

After months of driving through road construction in town, I finally had a chance to take a clay bar to the truck. It’s a 2020 with only 4K on the odo and this was the clay after just the one door.

 

What lights did you go with and how’s the install? I want all the deets!

 

how was applying the fluid film? Did you get it on a lift or what?

also, nice tail lights. Which ones did you get?

 

Putting back on rear mud flaps. Modified/trim so it would pass Hawaii’s Reconstruction Safety sticker. Think I might just keep them on

 

Wow. I want to put my mattress under there and lay there.