What have you done to your 2nd gen Tundra today?

this is exactly why I went shell, bigger toys for the kids..LOL..when packing for trips I needed the vertical storage a camper shell offers

 

I added the ones from @mattgecko here. Perfect.

 

Gave the goat a wash, then used a couple of aerosol silicone spray can’s on the tires inside-out, wheels, fender liners shock boots, all the b/joints, c/v axle boots, t-rods, rubber brake lines, driveshaft boots. This stuff makes rubber and plastic look brand new again! I’m stoked as I love black, not glossy tires. I didn’t take any before pics, but I’m telling you it’s so much better!

 

looks clean !

 

Ended up going the easy and cheap route on the back bumper. Considering it’s a work truck and overall condition of the rest of the truck. Got the bumper on eBay $190 with free shipping. Reused the plastic parts.

 

Yessir, headed out to get it dirty in the bush to check trail cams now haha.

 

have both, had to buy a aftermarket camera and wire it to the unit but it all worked out.=)

 

There goes all my cleanliness haha. Fender flares worked awesome for containing mud and dirt within the flares, makes me excited!

 

Beast in the wild !

 

Finally got the time around fire season to wire in my ditch and side light switches. Nice to look clean and not have a bulky toggle switch anymore. Quick and simple.

 

Still running 37s? , truck looks awesome

 

So awesome love this build

 

It’s about time!

 

Thanks Mike, still 37x12.5x18s yep

 

I see a pattern developing....

Moar wood.

Tundra hasn't had a bath in weeks.

 

Installed my ADS 2.5 Triple Bypasses today.

thanks @831Tun for the helping hand and helping position that passenger side shock so it doesn’t get damaged.

 

Did a PlastiDip job on the emblems today. Got dark so my final pictures aren't great. Have to fix my iForce emblem, tried to get the red to show through and just didn't turn out how I wanted. Have to remove and do it all over. Very pleased with a first attempt though.

 

Looks good. 3 questions for you:
How long did it take?
How many cans?
Did you paint or dip your rims?
Thanks

 

Rims were painted already when I purchased the truck. Only took me one can for all the emblems (about 7 coats) and roughly 4 hours with some pretty long time for drying between coats. Very easy job. On YouTube look up "dipyourcar" they have a video on how to do emblems. I got my PlastiDip cans from the local Walmart for $5.50

 

How do you like your airbags? I’m still debating if I want airbags of a lift suspension. Also is your front on air too?

 

5100's on the front (lowest setting).
Love the air bags. I use a bike pump to inflate. Doesn't take much to get them to pressure.

 

Why did they use the wrong dash kit, they make a gray one that matches.

 

Had the tranny flushed with WS at 85,000 miles. Local dealership did it for $221.00 (plus crush washers for the rear diff which I'll be doing my self, later this month)). Shifts WAY smoother now and less jerking when pulling from dead stop. Removed all the old PS fluid from the res and replaced with Valvoline synthetic II/II/etc. Will do this again, weekly, for a month to get as much of the old fluid out as possible). Old fluid was pretty clean (previous owner was a Toyota technician so I'm guessing he'd already flushed it).

 

Not to sure, it was the only option it gave me on crutchfield when I checked out

 

Got my Snugtop installed today. I will try and get pics soon.

 

This is the one you want: https://www.crutchfield.com/p_120998220C/Metra-99-8220-Dash-Kit-Gloss-Charcoal.html?tp=3121

That would bug the shit out of me.

 

Where did you purchase the belt trim? I have to replace all 4 of mine on my CM. Do you have a part number or link?

 

I would also like to know this

 

https://www.tundras.com/threads/belt-moldings-for-all-years-and-models.52575/