Coach builder TRD Pro Kit

Has anyone installed the Coachbuilder TRD Pro kit on a 2020 Pro? If so, any feedback you provide will be appreciated. I’ve spoken to Dave at CB and he’s been helpful but just wanted to see if anyone has this setup.

https://shop-coachbuilder.myshopify.com/collections/frontpage/products/coachbuilder-trd-pro-kit-2015

 

I'm interested in this as well. I'm leaning toward Westcott Design Pro Lift Kit front & back, but the more I read, I may want to use Coachbuilder shackles in the rear versus the block from Westcott. My Pro is a daily driver and used off road just for camping and light trails. I tow a camper and bass boat occasionally. any advise would be greatly appreciated.

 

I went with CB +3 shackles in the rear, but I have the Westcott Designs Pro lift in the front. I really like how mine came out.

 

This is as my plan as well! what tires are you running? If you have a full size spare does it hit the shackles?

 

I'm running 295/70-18 on +25 wheels. Had to trim the liner a little to stop the rubbing. I'm running the original spare and its fine. Not sure about a 295/70-18 spare fitting.

 

So as an update, I did install the Coachbuilder kit on my 2020 TRD Pro truck. They claim that no modifications are required but if you’re running 35’s like me, the front will rub on hard turns in reverse. This is even with the bumper shims, which should be at least another 1/2”

 

Sweet...can you share some pics?

 

Could you share some pics?

 

Where does it rub? Passenger side sway bar tube?

 

Westcott & +3 shackles


295/79-18

 

love the voo doo!! That’s the color I originally wanted. Just looks so good.

 

Very Nice!!!

 

On the front inner well plastic on a hard turn in reverse

 

I went with Westcott and couldn’t be happier. The guys at Westcott spoke highly of Coachbuilder and stated they use some of their products also.

 

Very Nice!!

 

Thank you, sir!

 

We need pics man! Are you running spacers?

 

I have a 2020 pro with westcott front and Coachbuilder shackle’s. If you like the way your pro rides, I wouldn’t advise the westcott front kit. I’m taking it off

 

Thanks for posting, Contact up front normally happens if the caster is set too high even with 35"s. how's your clearance at the body mount?

Alignment specs we use and recommend with our PRO kit.

Camber +.2 Degrees Per Side.

Caster +2.2 - +2.5 Degrees Per Side.

Toe +.07 - +.10 Degrees Per Side, Not to Exceed +.20 Combine.

 

Sadly we see this often, anytime you add preload to a tuned coilover it rides rough and choppy.

 

If i Have the CB kit, and i decide to add a bumper with winch, can i install different springs for weight and still function regularly?

Are there any Upper control arms that allow more range of adjustment if using wheels without spacers?
thanks, B

 

What year is your PRO? there are springs options you're able to use with added weight.

Most often you wont need a UCA thats adjustable but def can use them. SPC and Icon (Billets) are adjustable but would also recommend Total Chaos or JBA. Feel free to call in if you'd like to go over in better detail.

David 801,635,4872

 

Awesome. Thank you so much for the info! The tundra is a '21 pro model. I will reach out to be sure everything is compatible with the kit before i order. Thanks again,
B