What have you done to your 2.5 gen Tundra today?

Welp, I think one picture just talked me outta that mod.

 

Looks awesome man!

 

looking good pare!

 

More storage.

 

Thanks I don’t know how I looked right over them. Must have been half asleep lol.

 

I just made two small jumper wires with flat spade connectors. Not plug n play, but also no cutting wires involved.
You will need to open up the hole in the plastic panel though... as the new USB port is a larger diameter.

 

Installed OME 612 Coilovers and Wet Okoles this weekend.

 

I like it a lot.

 

Yup...back in '98 I had a new company vehicle coming into the dealership and specifically called out 'NO dealer stickers, decals or badges.' They were great and didn't put any on.... probably would have if I had not said anything.

 

https://arksplashguards.com/

Currently working on some final details,

Expect to see the Group Buy posted in the next week or so

 

Got in from teaching a rifle class over the weekend to find a big ass box of awesome from Dirty Deeds waiting on my front porch.

Woke up this morning and installed it out in the driveway. Super pleased with it.

 

Who makes this? Me want one.

 

got some new steps installed this weekend!

 

Oh no, way beyond my skill set!

 

Added a little flair to my MGM truck with some TVD Vinyl Decals in keeping with the black and red color scheme of the TRD Pro. Not sure if I'll keep the Toyota grill lettering change or not, still trying to get used to it.

 

Really like the red, makes it pop, very nice!

 

Took her off roading again

 

Which system did you buy? What do you think so far? Ordered the 8" myself. Hopefully gets delivered this week.

 

Most recent is suspension lift and wheels!

 

Honestly, I've seen lots of posts about this. Your pictures are the best I've seen to show the actual process. Looks good!

 

Sold mine for a Cummins!

 

GENUINE TOYOTA TUNDRA GUN SAFE FOR CENTER CONSOLE 00016-34174

https://www.amazon.com/GENUINE-TOYOTA-TUNDRA-CONSOLE-00016-34174/dp/B07CXPPZS5

 

CB. Shackles installed and raised the Toytecs up front about 5/8”. Sitting at 41” in the rear and 40” up front. Just about right!

 

Link to it ? I need a couple more and they don't sell the ones I have.

I did nut certs for the holes in mine.

 

I got the 8" as well. I dumped my tailpipe after the axle so it is louder than many have described their 8" systems.

It is noticeably louder at partial throttle with a deep tone. It isn't annoyingly loud but you certainly hear it.

At wide open throttle, you are turning heads. It sounds amazing. As soon as you let off, it simply shuts off.

I am very happy with the system. It took me about a hour to install while crawling under the truck and fighting with two stubborn bolts. Had I known it was coming in, I would have hit them with WD40 for a couple of days prior.

 

Brush guard looks great; what did you do to prep the chrome for the Raptor Line?

 

I got mine from Toyotaparts4u on eBay he has them for 270.97

 

I took my Tundra in to have the missing mounting bolt at one end of my Rigid light bar replaced. I would obviously have done this myself. Except that to access the bolt / bolt hole the aftermarket skid has to come off. But to remove the skid bolts, I have to drop the bumper (some bolts seized, others just spinning, and I can't reach them without dropping the bumper). Got a call from the manager - they will need to torch out some of the skid bolts, and the NFab skid is interfering with a factory skid plate, which is why the bumper is smashed up against the bottom edge of the body and chipping the paint off the body and the bumper. So they need to modify the NFab skid and the bumper mounting holes to provide some body clearance. Thanks NFab.

Oh, and I noticed that my passenger rear tire sticks out exactly 1" farther from the fender and frame rail than the driver's side. Apparently this is a known "thing", and the rear axle is actually offset to the passenger side when they leave the factory. WTF?? Some days you eat the bear...

 

I'll update once I get the piece welded on..practicing atm..haha

 

The new bumper is finally done (completely)
-4 Rigid Radiance Pods, with blue backlighting tapped into factory fogs
-42” Nilight Bar
-custom switches by ch4x4
-installed Rivnuts for skid plate
-trimmed and painted side mesh pieces
-installed factory parking sensors

Install videos are uploading to my channel now, love how it came out!