Official Tundra Wheel and Tire Setups - Pics and Info

I'd say a +18 or +12 would line up better if you're planning on flares. This sizing tool would help give ya a better idea:
http://www.rimsntires.com/specspro.jsp

 

I'm currently running a 305/65/18 with stock TRD rims and a 1 1/4 spacer, so an 18x9 with a +12 offset would put me 1.5 inches farther out? Thanks in advance.

 

no, I think it would be closer to 2.4"

 

Without the spacer? Yikes, too much for me. Thanks.

 

No, that was without the spacer. With the spacer it's about .7" from where you are.

 

That would be acceptable for me. Thanks Joon

 

no wait... it's 1.1" from where you are now. Dammit, I get a different answer every time I calculate

 

Thanks very much for your help

 

What size lift do you have? I have the toytec 3/1 spacer and AAL. I went with the 17" NV wheels and love them but I'm rubbing the liner up front even after pushing the bumper out 1/2 in and I'm rubbing the body mount in reverse. I currently have 315/70r17 in the KOs. So I'm trying to find the perfect balance. I don't really want to do the CMC or cut and liner out of the wheel well.

Thanks.

 

I have 18x9+12 with 305/65/18's. If you want to see pics go on my build thread I had plenty.

 

I need some help, I have a White 2016 TRD PRO, it currently has 275/65R/18 tires. I want to lift this and put bigger tires on it. I have two questions that I need some help and guidance with.
1. What is the largest tire on the stock 18" rims? My truck has the standard 2" lift and level already done.
2. I like the wider look with big tires, how would I best achieve this?

Thanks in advance for all the help.

 

I keep meaning to post on here. 2016 CM 4 x 4 with same stance as a PRO (2/0 lift). 295/65/18 Duratracs on stock 18" wheels. No rubbing but as you can see, front bumper is not stock.

 

Can i put 33x12.5 x20 and a OEM wheels with a 3" leveling kit and will they stick out can someone help me thanks

 

2017 TRD Pro
4" readylift (making it to what I would estimate to be 5-5.5" lift)
20x9 BMF BATL 0 offet
35" Toyo Open Country MT 1250R20 121Q

 

Thanks. Your trucks stance is right where I want to be, great build. 18x9 +12's ordered today.

 

What wheels did you go with?

 

Correction +15. Grid GD3 matte bronze

 

Mine and my buddy's. Both 2016's, white 1794 and black platinum and both have colour matched bumpers with trd pro grill and trd dual exhaust!

 

Well after a confirmed fitment, placing the order, a call saying they won't fit, then a call saying they will fit with an email from the manufacturer confining fitment-I was nervous. Order canceled went with my second choice, Black Rhino Razorback in +12. Guaranteed fitment in writing.

 

I have an 06 sequoia(no lift) with 16 inch wheels and I was wondering if the 17inch rock warrior wheels seen in post 22 off a 2013 tundra would fit on my sequoia, and what is the max tire size. I have the opportunity to buy some but I am worried about the fit

 

Not sure, but maybe this will help someone.

Measured against the lowest part of the fender (where it sticks out the furthest) and the outside of the rubber on my unit is 1.125" outside of the measurement spot.
Running SCS 18 x 9 +25 offset with 285/65-18 BFG KO2's. Only thing that had to be done was removing the little "mud" flaps on the very front part of the front wheels. Front has 5100's at mid setting.

 

Your 06 sequoia has 6 lug, 07 and up tundra 08 sequoia are 5 lug. You'd have to get adapters which would push the wheels out.

 

TOYOTA TUNDRA NEW BBS 20" WHEEL MATTE BLACK / ALLOY WHEEL SET OF 4 00041-34210
Part Number 00041-34210X4


WHEELS INCLUDE CENTER CAP AND LUG NUTS



DESINGED FOR 2011 AND UP TOYOTA TUNDRA MODELS






Sale Price:
$1175.00

 

That thing looks good

 

I like the way your truck looks. Am I correct in assuming you do not have any wheel spacers? How much room do you have between the tires and upper control arm being that those tires are roughly 1" wider than stock on stock rim offset?

 

Xd 825 20x12 -44 offset
Toyo m/t 37x13.5
8 inches of lift

 

Thanks

 

You are correct, no spacers. There is less room between the tire and UCA than I like but I have no rubbing issued. I don't have a measurement.