1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

help with spyder headlight adjustment

Discussion in 'Lighting' started by swede78, Jan 22, 2017.

  1. Jan 22, 2017 at 7:26 PM
    #1
    swede78

    swede78 [OP] Not so new member

    Joined:
    Sep 25, 2015
    Member:
    #1855
    Messages:
    293
    Gender:
    Male
    First Name:
    Lars
    westminster co
    Vehicle:
    2019 tundra platinum mgm crew max
    Nothing yet
    just bought some spyder headlights, projection u bar led with h1 halogen bulbs, like the ones in the other spyder post but for a 08 tundra. problem is when i have the low beams adjusted horizontal/vertical and turn on my high beams the pass side shines directly to the drivers side, while the drivers side shines straight. high beam reflector messed in wrong? i bought theses from carid.com going to call them tomorrow. also not sure about the low beam light output, dose not seem very bright, thanks for input.
     
  2. Jan 30, 2017 at 10:16 AM
    #2
    whammy_0

    whammy_0 New Member

    Joined:
    Jan 24, 2017
    Member:
    #6081
    Messages:
    19
    Gender:
    Male
    Vehicle:
    2010 Rock Warrior
    I tried putting mine in on my 2010, but couldn't get my low beam light to come on at all. Also, don't bother calling carid. just call Spyder directly, and press 2 for tech support extension.
     
  3. Jan 30, 2017 at 5:52 PM
    #3
    swede78

    swede78 [OP] Not so new member

    Joined:
    Sep 25, 2015
    Member:
    #1855
    Messages:
    293
    Gender:
    Male
    First Name:
    Lars
    westminster co
    Vehicle:
    2019 tundra platinum mgm crew max
    Nothing yet
    ended up sending pics to carid and am in the process of returning them for another set, hopefully they will be better. as for the low beams i had the same problem on the drivers side, i ended up sanding down the end of the pig tail from the lights to where it plugs into the factory harness, then it worked, it did not take much. hope you got your's working.
     
  4. Feb 1, 2017 at 7:40 AM
    #4
    whammy_0

    whammy_0 New Member

    Joined:
    Jan 24, 2017
    Member:
    #6081
    Messages:
    19
    Gender:
    Male
    Vehicle:
    2010 Rock Warrior
    Thank you sir! I'll be putting them in today. Hopefully we can make them work.
     

Products Discussed in

To Top