Rock Warrior club

Mine is a 2011, had 102k on it when I picked it up. Mud tires, undercoated (plus the bed coated), remote start, K&N intake, cheap lift kit...looked the part for off-roading but was a daily driver. Overall really nice condition. I think I paid right around $20k for it (Wisconsin).

 

Sounds easy enough. Holding up okay over time? How have they handled washing?

 

5/6 coats..holding up fine so far. Don’t power was them and it should hold up. Just did the rock rings and center caps on the wheels...really changed the look! Not a fan of chrome!

 

Good news is Tundras hold their value!
Bad news is Tundras hold their value!

 

Eh, there goes that idea then lol...I typically PW the truck (when it's not -20, mind you).

 

I’ve been through cars washes with them.. no problems. And I do sometimes power wash the truck. But am careful not to HOLD the wand directly on the plasti dipped badges.

$5 and 45 mins? I figured why not!

 

Just a couple random pics.

 

Anybody in here changed their factory RW lug nuts to gorilla? My "key" for the TRD locking lugs broke on me and I'm wanting to ditch the locks altogether after this and upgrade the whole set to some black lugs and want to make sure I'm getting the right ones. The ones I'm looking at are the 26143BC and are the middle right ones on this page. https://www.gorilla-auto.com/small-diameter-lug-nuts-page-02#

 

I joined.....

 

Looking good! What part of Ohio are you from? Those logging road pics look a little bit like southern Ohio. I’ve got a rock warrior here in Athens county. Nice truck you have there!

 

This was down in Vinton County so not too far from you! Im in the Cleveland area

 

BHLM, new tail lights, and +3/1.5

 

No factory locker..forged aluminum wheels, color matched bumpers, 285/10/17 BFGoodrich KO from the factory, Bilstein shocks, And a TeRD Rock Warrior decal, and Good Looks!!

 

Hey guys, I got 2013 Rock Warrior, just installed a Toytec ultimate lift and SPC upper control arms. next up is tires, but my only dilemma is, I don't want to run spacers, but I do want to run 35's. I'm reading people are running 35 x 12.5R17 on stock setup, even coilovers but with stock UCA. So my question for those who run 35's with an aftermarket UCA, how close is the tire to the UCA? Body chop isn't a problem if I do need to get it done.

 

Haven’t got my 35’s yet. I’m lead to believe with RW wheels with 35’s will fit with minor trimming if the front plastic wheel liner, remove the front mud flaps, splash guards, and slight skid plate late trimming, clears the UCA’s by about 1/4 inch. No BMC in most cases? Sounds like it is real close to the body mount and properly adjusted UCA’s help? Correct me if I’m wrong somebody?

 

MTRock, are you on stock UCA? Yeah, I've narrowed my research to what you laid out. I already had to trim my skid plate with my 3-1 level and stock 285/70R17, so as far as trimming goes, shouldn't be a problem, I'm more worried of tire to UCA contact. I'm trying to get some answers before I pull the trigger and buy the 35X12.5R17, mount them then find out they don't fit

 

I just installed spidertrax 1.25 spacers behind my rw wheels in preparation for 35’s, takes all worry away and gives a slightly better looking stance.

 

Stock UCA, 285/70/17. Didn’t have to trim my skid plate after 3/1.5

 

Im doing the same.. Let me know when you get them on!

 

New here. Bought this RW as a project a few months ago. Hoping to enter the world of unpaved adventures soon. Some mods coming, but not before I fix the massive undercarriage rust issues.

 

where did you get that lower fog light housing ? looks awesome !!!

 

anyone have one for sale?

 

It was made by Ansani Designs. I don’t know if they are still making them. I bought it over 6 years ago.

 

seems like they dont sell them anymore , Thats a really nice design , Thanks anyways!

 

Started on a back stop build over the weeked, ran about 4 full trips loaded down in the trailer and bed. Picked up approx. 154 tires mounted to steel wheels (all free of charge)

 

First time on here...

 

Welcome from Ohio

 

Hello RW Tundras, I don't own a RW but I do admire your wheels as most do! I've just picked up some RW Wheels in Grey and read all 9 pages of this thread before asking these questions. Page 4 said the stock 285/70/17 tire will fit my truck. I have a new to me White 2018 DC SR5 4WD and no lift or leveling kit or Modifications)
I will be mounting them on 285/70/17 Cooper AT LT tires in the morning at Pep Boys since it's a Black Friday deal. My Questions and thanks in advance!
1. This should fit without any modifications to my truck right?
2. Will my lug nuts work with the RW wheels?

 

Your good! 0 mods required..probably Even fit 295’s