Suggestions on spacers

Guys I would like to add some spacers to my stock wheels just to give it that look where it’s sitting an inch outside the fender. Any suggestions? I do not want to lift or level it right now..

 

Spidertrax spacers.

http://www.spidertrax.com/2007-Up-Toyota-Tundra-Wheel-Spacers

 

What size give me just an inch outside the fender? I got stock 18” trd off-road rims

 

I think 1.25.
Hopefully someone more knowledgeable will chim in.

 

I’m getting ready to order these, from what I hear and read they will make them stick out pass the fenders about half an inch. Could be wrong tho.

 

Measure your tires to the fender' or where you want the tire to be. Order spacers accordingly. I wouldn't exceed 2" spacers.
Also make sure you torque them per instructions.

 

I have BORA wheel spacers 1.25". I have the BFG KO2 33" tire which is one up size from stock. Pretty sure its the same width, and my tires are dead even with the sides.
I would say if you want them to stick out around an inch go with 2". What you need is a "Hubcentric" spacer. As long as you get spacers from a reputable company like spider trax or BORA, and they are hubcentric you will be winning.

EDIT: You will also need to install correctly and torque as well as retorque. Don't be cavalier. 2" spacer is probably max as mentioned above.

 

I ordered a set on 1.5” from www.wheeladapterusa.com
I haven’t installed them yet but they are quality man! Hubcentric, grade 10 mugs pressed In and super fast shipping. min addition, made in the USA!