just got a 2015 and need to get a brake controller

found a thread about brake control installation and knew I needed to get on this, I have the tow haul, the 7 pin, and the 4 pin conns., what do not have is a brake controller. so that is what I need to get some info. on

I have a 2003 4R, I have EMU suspension and brake control, added AFE cold air intake and use it a lot VOT pulling grades with 21 ft. Spree Travel trailer...the Tundra I expect will hardly notice.

 

I think the prodigy p3 is what is suggested most, teckshona or something like that. And ESP makes a little trim piece to make it look good.

 

https://www.google.com/url?sa=t&sou...FjAAegQIBRAC&usg=AOvVaw2TOTSLPz0EPVjE6dGbIaYd
https://www.etrailer.com/Brake-Cont...-w0gl-4tvSCd6xPKjl7wOLbFbjZoSz5xoCZpwQAvD_BwE

 

thanks, they are on the way...……...

 

Wow that was quick.

 

The 2015 will accept the factory integrated brake controller. 5 min installation and totally stock

 

Just be aware of the past issues but also with the recent TSP I have noticed noticed a vast improvement with the system.

https://www.tundras.com/threads/factory-brake-controller-issues.5103/

 

thanks for your assistance, here is the end game

 

if anybody needs a stock 3 gage panel, I got one with no future...….

 

You may also need an adapter wire that can be purchased online for plug and play from the p3 to the truck. I think it was around $10 on eBay when I got it.

 

Installed the Tekonsha P3 controller in my 14 in early 15. Never looked back. With the plug and play harness from Tekonsha and swapping out the panel to accommodate the controller, it has served me well.

 

Thanks for making this so easy and posting the information. I just ordered everything you suggested.