ICON 17" Six Speed Wheels Picture thread :)

Got mine mounted up a couple of days ago. 315/70R17 BFG KO2's, no CMC

 

looking meaty ! the K02 tend to size smaller than other brands. probably why you ok with no CMC. did you get an alignment too ?

 

Brey, what lift are you running?

 

@Kwint23 wheres your front bumper?

 

Yeah I did not expect these tires to be as big as they are in person. And yeah I got an alignment after my lift went on.

Toytec ultimate coilovers up front with toytec shackles set at 1" in the rear with bilstein 5160's. I beat on it pretty hard today and I'm super happy with how well it performed. And the red springs on the coilovers add like at least 15HP which is super noticeable.

 

I had removed it to see what was hitting. And I have a new one on order so I left it off. Since I went with 37's I wasnt sure exactly what I would have to trim. So I took the bumper off to eliminate that and then went at the body mounts til no more rubbing.

 

What size tires? Looks great

 

Here's a couple of mine all clean

 

What topper is that? Looks good

 

They’re 285/75/17 BFG KO2 tires. I’m very happy with them so far.

 

Think I'm going to pull the trigger this weekend on some six speeds. Having a hard time choosing a color to go with Gun metal. Right now bronze has an slight edge

 

I just put some Gunmetal 6 Speeds on order for my MGM!

Probably won’t put on til April, thinking 285/70s. Excited.

 

Good color choice too. Only color i dont want rt now is black...I think

 

Just switched from black to gunmetal.

 

What are the best lug nuts for these? Looking for black, w/ the GM rims.
Thanks!

 

When it comes to tires, will a shop have a good idea of how big you can go based of clearance. I'm assuming they wont install a couple different tire options till you find the right one?

 

I bought the wheels and lugs off SDHQ. They are black lugs and I bought the bronze wheels.

 

Thanks - I think I'll check theirs out. And also check w/ Discount Tire (where I'll have these installed)

 

Got my wheels mounted finally. 315/70r17 Duratracs. Had to move the front liner forward a bit which was easy, and my mudflats been removed but I assume that would have rubbed slightly too.

 

Nice!

 

Does anyone have any input on these tire choices for these icon 6 speeds.
Wildpeak at3w, toyo open country ATII or nitro terra grappler GT. I'm in florida so how well they handle wet roads are important. All are 285/70r17s as I think a 285/75r17 will rub as i just have bilstein 5100/top setting

 

either Toyo or Falken imo

 

Thanks. I can get a set of toys for $615+tax for that size. Seems like a decent price

 

I don’t have any experience with either of those tires brands, but 285/75/17s fit on my Icon Rebounds with 6112s set at 1.9”.

 

That's good to know. The top setting on my 5100 is roughly 2.5". I think the rebounds have the same offset and back spacing as the 6's. I'm assuming you had to remove the mud flaps?

 

I left the rear mud flaps on. I had already removed the front bumper plastic cover before I installed the 6112s with the intention of cutting, re-drilling and reinstalling them, but I haven't done that yet. So I don't know if they'd rub.

 

I have 37x12.5x17 on my truck. I did a bmc and took the front mudflaps off. But I do have an aftermarket front bumper. I'm on 5100 top setting. I had 33's with stock wheels and didnt rub. I would say you shouldn't have to do much if anything. If I went with 35's I dont think I'd have to have trimmed the body mount at all.

 

Thank you. That's what I needed to know. I think 285/75r17s would look better than 285/70s but didnt want to sacrifice anything other than losing mud flap. I have a heat gun, dont mind manipulating the wheel well plastics either.

 

Here are mine. Bronze color with black lug nuts off Amazon. Running a 315/70R17 General Grabber ATX. Not close to the body mount at all so no chop necessary. I haven't adjusted the preload on the King's at all since I installed them so I can go up a considerable amount if needed.

 

looks great