1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

P&P Engineering Tundra Rear Overland Dual Swing Winch Bumper

Discussion in '2.5 Gen Tundras (2014-2021)' started by mac11, Jan 8, 2017.

  1. Jan 8, 2017 at 8:55 PM
    #1
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    A couple months ago we met Cody - @MidwestOverlanders - and made some sliders for his Tundra TRDPRO, Brutus. Since then we've seen a very strong interest in our sliders and Cody has trusted us with his truck to take on front & rear bumpers, full front to rear skid plates (pics coming soon) and now a low pro front bumper. We're very close to having them production ready and thought we would throw up some pictures now that we've roughed in the low pro bumper.

    This is our full plate rear winch dual swing arm overland bumper. It was designed around a smittybuild X20 12k winch. Will fit almost any remote solenoid winch up to this size as the winch bucket is the full width of the frame rails of the truck.

    The full bumper weighs in around 225-250lbs as shown with all options - integrated hitch, winch mount, dual swing arms, spare tire mount, maxtrax mount, dual jerry can buckets, and hi-lift mount.

    The mounting brackets are 1/4" thick and mimic the stock hitch brackets for strength.

    The hinges are the best of both worlds - the strength and security of a double shear mount with the load carrying capacity and smooth swinging action of a tapered roller bearing.

    MaxTrax mount unpins easily for access to the spare tire. Both swing arms have locking pins that hold them open at 90 and 180-degrees for easy access if they needed to be open in an off camber situation.2016-11-30.jpg 15259599_1756460981346185_1738623945848547374_o.jpg 15303846_340616382960382_334524866_o.jpg

    15326222_1756461134679503_4123854692360525020_o.jpg
    15370168_1756460924679524_7566168376088467112_o.jpg
    15397788_1762168087442141_1220638791_o.jpg
    15418454_1756460964679520_1821053162088000974_o.jpg
    15540466_1762168360775447_432112729_o.jpg
    15935562_10107455821051778_167863264_o.jpg
    IMG_4794.jpg
    IMG_4798.jpg
    IMG_5071.jpg
    IMG_5990.jpg
     
  2. Jan 8, 2017 at 9:06 PM
    #2
    dcsleeper408

    dcsleeper408 BASTRDS

    Joined:
    Nov 10, 2015
    Member:
    #2081
    Messages:
    4,946
    Gender:
    Male
    First Name:
    mark
    San Jose CA
    Vehicle:
    2015 TRD PRO
    Love it!
    When will this be available?
     
  3. Jan 8, 2017 at 9:19 PM
    #3
    csuviper

    csuviper Moderator Staff Member

    Joined:
    Jan 6, 2014
    Member:
    #38
    Messages:
    17,283
    Gender:
    Male
    First Name:
    Brian
    Broomfield, CO
    Vehicle:
    2019 TRD Sport CM 5.7L 4X4
    Some Mods :) See build thread for details
    Very clean and functional. Good work.
     
  4. Jan 9, 2017 at 8:36 AM
    #4
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    Shortly. I would really like to get 1 more local guy to bring to a truck to the shop (Warsaw, Indiana) so we can prove out the jig we have.
     
    dcsleeper408[QUOTED] likes this.
  5. Jan 9, 2017 at 8:42 AM
    #5
    joonbug

    joonbug °°°°°°°°°°

    Joined:
    Oct 13, 2015
    Member:
    #1948
    Messages:
    16,674
    Gender:
    Male
    First Name:
    Joon
    NorCal - Dublin
    Vehicle:
    2020 Long Travel DC
    Do you have a price yet? And does the tire block the back up cams view at all?
     
  6. Jan 9, 2017 at 8:45 AM
    #6
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    yes, it deff will block the view the the backup cam. No way around that but to relocate it. The price is on our webstore - I don't think I can post that here as I haven't been able to get setup as a vendor.
     
  7. Jan 9, 2017 at 8:52 AM
    #7
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    What do you need to do to prove your jig. I already have an after market rear and front bumper but would love to see you succeed. I had a hard time finding a rear bumper I liked because almost none of them followed the angled body line on the wrap around. And your local!! i'm in Noblesville and we have a cottage on Lake Palestine outside Warsaw. If I could come up and help you prove out what you need, let me know. Is this a "leave the truck for the day" thing or a couple hours of fitting?
     
  8. Jan 9, 2017 at 8:59 AM
    #8
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    IMG_2296.jpg Here's what's on the truck.
     
    zcarpenter92 likes this.
  9. Jan 9, 2017 at 9:05 AM
    #9
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana

    Ideally we would have the truck for a 2 days. Build a bumper out of the jig we have, test fit on the truck, make any tweaks, changes, additions or subtractions to the jig - if necessary. The do the same to the part - if necessary. Once we get the part coming out of the jig how we want it, we're done. We then like to run a 2nd part (or 3rd, 4th, 5th if necessary) out of the jig that comes out to our satisfaction with no rework.
     
  10. Jan 9, 2017 at 9:05 AM
    #10
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana

    out of all of the available bumpers I think this is what I liked the best before we started on ours.
     
  11. Jan 9, 2017 at 9:11 AM
    #11
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    I'd have a tough time giving it up for 2 days right now. Do you have pics of the skid plates you made?
     
  12. Jan 9, 2017 at 9:12 AM
    #12
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    12,518
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    very cool. any plans for us gen2 ? :)
     
  13. Jan 9, 2017 at 9:15 AM
    #13
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    Gotta get a truck in the shop.
     
  14. Jan 9, 2017 at 9:19 AM
    #14
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana

    Not on the truck. I'm still waiting on getting them back from powder :mad:. Front to back is a 6 piece system. Just behind the bumper to the crossbar behind the engine oil pan is 2 panels that bolt together and to factory mounting holes on each end. Then the Transmission and transfer case each are seperate plates that span the next 2 cross members. The TC skid bolts to the driveshaft hoop at the back and also to the front panel of the fuel tank skid. The fuel tank skid is 2 panels that covers the ~38 gallon extended range tank on the TRD PRO.

    Transmission
    IMG_5203.jpg
    IMG_5204.jpg
    IMG_5270.jpg

    Front of the Fuel Tank
    IMG_5205.jpg

    Front of engine (top) Transfercase (bottom)
    IMG_5267.jpg

    Both pieces of fuel tank
    IMG_5268.jpg

    2nd piece of engine/front diff skid
    IMG_5269.jpg
     
    J4RR3N4, FirstGenTundra and csuviper like this.
  15. Jan 9, 2017 at 9:20 AM
    #15
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    Toyota in Lafayette just got a new white TRD Pro in stock last week. It's be sweet with one of those bumpers. Make 'em a "marketing trade".
     
  16. Jan 9, 2017 at 9:24 AM
    #16
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    You guys in the shop this Friday? I have to be in Peru mid day. I'd like to see your shop. Might run up there after my meeting.
     
  17. Jan 9, 2017 at 9:25 AM
    #17
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana

    That is pretty far from me to be doing local business with. I'm trying to talk to the local Toyota dealer.
     
  18. Jan 9, 2017 at 9:26 AM
    #18
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    We are closed Friday + Saturday. Our shop isn't that exciting.
     
  19. Jan 9, 2017 at 9:26 AM
    #19
    FUNTUN

    FUNTUN New Member

    Joined:
    Aug 2, 2016
    Member:
    #4063
    Messages:
    72
    Gender:
    Male
    Vehicle:
    2016 TRD Pro
    AFE intake, Hypertech tune kit, AMP power running boards, MT Bajas, XD rims, Linex bed liner w/TRD Pro logo, Revolver X2 bed cover, Swing Case undercover storage boxes, vent shades
    Good Luck!! Looks like quality product.
     
  20. Jan 10, 2017 at 1:19 AM
    #20
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    Finally saw the skids back from powder. Will have mounted pics in a few hours when I get back to the shop. I'll start a new thread specifically for them. I'll ask be posting on our Instagram & Twitter (@pp_engine), as well as Facebook (@PandPengineering)

    IMG_5334.jpg
    IMG_5332.jpg
     
  21. Jan 10, 2017 at 3:55 AM
    #21
    Spvrtan

    Spvrtan Amateur fabricator

    Joined:
    Apr 2, 2015
    Member:
    #1140
    Messages:
    1,676
    Gender:
    Male
    First Name:
    Kris
    San Diego, CA
    Vehicle:
    Black '14 CM SR5 w/ SC; 40s on 17s; 5.29s
    Wow, that thing looks stout! If only you could make a high-clearance version, I'd be in -- remove the rear winch functionality, extend the corners to wrap toward the wheels, and chop the bumper's height in half.. I'd pay the extra for that in a heartbeat..

    [​IMG]
    [​IMG]
     
    tat2ude39 and aperezsh like this.
  22. Jan 10, 2017 at 8:27 AM
    #22
    the_midwesterner

    the_midwesterner New Member

    Joined:
    Nov 21, 2016
    Member:
    #5286
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Luis
    Vehicle:
    2016 Tundra TRD Pro - Quicksand
    None, yet....
    @mac11 you have a pm about getting a 2nd truck.
     
    mac11[OP] likes this.
  23. Jan 10, 2017 at 9:25 AM
    #23
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    that's going to be pretty drastically different than what we have done so far. I would love to do that as a custom build if you could get the truck to the shop in Warsaw, IN. I can offer towing services regionally if that makes more sense. Cool truck, btw.

     
    dcsleeper408 likes this.
  24. Jan 10, 2017 at 10:04 AM
    #24
    FirstGenTundra

    FirstGenTundra R2R

    Joined:
    Feb 18, 2016
    Member:
    #2715
    Messages:
    834
    Gender:
    Male
    First Name:
    Daniel
    Wyoming
    Vehicle:
    2014 Toyota Tundra TRD
    You guys did a great job following the body lines! Any plans for a non swinging bumper? :D
     
    mac11[OP] likes this.
  25. Jan 10, 2017 at 10:39 AM
    #25
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana

    Yep, all we have to do is not put the swing arm brackets on =)
     
  26. Jan 11, 2017 at 3:33 PM
    #26
    dejabrown

    dejabrown New Member

    Joined:
    Jan 9, 2017
    Member:
    #5881
    Messages:
    56
    Gender:
    Male
    First Name:
    Dave
    Gilbert, AZ
    Vehicle:
    2010 Crew Max Platinum
    Backflip cover, OME suspension, Smittybuilt M1 rear bumper, Move front bumper
    Great looking bumpers! I want one...
     
  27. Jan 11, 2017 at 4:37 PM
    #27
    MotoTundra

    MotoTundra The Ocho

    Joined:
    Jan 6, 2014
    Member:
    #8
    Messages:
    7,645
    Gender:
    Male
    First Name:
    Don
    -TRS Mini D2S Retrofit on TRD Pro Headlights (Apollo 2.0 Shrouds, 35w XB Ballasts, 5500k Bulbs) -Baja Designs Squadron R Sport Aux lights. -TRD Pro Grill -TRD Rear Sway Bar -BakFlip VP Tonneau w/BakBox -Dipped wheels & bumpers -Iron Cross HD steps -Undercover Swingcase -SunTek Paint Protection film -Tinted glass -Bedmat -OEM Towing Mirrors
    Those products look great!
     
  28. Jan 12, 2017 at 2:55 PM
    #28
    signalbobby

    signalbobby New Member

    Joined:
    Jun 19, 2016
    Member:
    #3647
    Messages:
    212
    First Name:
    Robert
    AZ
    Vehicle:
    16 Tundra PRO & 4R PRO
    I love the fact that you have a rear bumper winch. I could have used that this past weekend, and last year.
     
  29. Jan 17, 2017 at 12:49 PM
    #29
    mac11

    mac11 [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4381
    Messages:
    393
    Gender:
    Male
    Warsaw, Indiana
    Yep. It's a little extra weight and expense but you'd have a hard time not being able to make a recovery with dual winches.
     
  30. Jan 17, 2017 at 1:04 PM
    #30
    joonbug

    joonbug °°°°°°°°°°

    Joined:
    Oct 13, 2015
    Member:
    #1948
    Messages:
    16,674
    Gender:
    Male
    First Name:
    Joon
    NorCal - Dublin
    Vehicle:
    2020 Long Travel DC
    Pics of skid plates mounted yet? And cost? Can't find it on your website.
     

Products Discussed in

To Top