Pics of Method wheels on your 2.5 gen

Does anyone have these on their Tundra? Can you please post a picture. I'm thinking of going with these .

 

17 inch bronze. Only pic I have at the moment. @Pinay has 20 inch.

 

Thanks man. What size tires are those and what offset ?

 

35 by 12.5 and 0 offset, so they stick out a bit. 17s only come in 0.

 

Looks awesome . I love that you don't have a huge lift. They fill the wheel well perfectly. That's exactly what I'm looking for. what do you have as a Lift? Did you have to do any body chop?

 

Thank you. 5100s on the 2.25 setting. No body chop, but there is ever so slight rubbing in reverse sometimes. I did have to trim my front bumper caps about a half inch and reattach the liners. But that's only because my wheel is 0 offset so it sweeps wide on turns. I also aligned it to push the wheels as far forward as possible.

 

Also I dont have a lift in the rear. I have an unpopular preference of the front being slightly higher or level.

 

So here is what I'm trying to do and wonder if you think it will work. I would like to go with the same wheels 18x9 or 17x9 whichever will look better. Since it's my daily driver, I'm going to go with 295/70/18 or 17 Nitto Ridge Grapplers which equates to 34.5 inches. Instead of cutting the plastic on the front, I'm going to install bumper shims to push it forward. I'm also going to go with either a 2" spacer lift on the front or 6112 Bilstein with 2". I'm trying to avoid rubbing or any body chop . I've been doing my homework and I think I'm able to get away with this without rubbing. Your thoughts

 

I'm leaving the back the same height

 

If you go with an 18 inch wheel that has some offset with that tire, you will probably be fine with that set up you mentioned.

 

I am running Method NV on 295-70-18 with Nittos no BMC only had to heat and mold inner plastic very slight rub backing at full lock. Toytec boss lift @ 3" FRONT ….rear has add-a-leaf and bags.

 

Thanks fellas.

 

I will have method double standards installed in a week when they come in. Stock tire size (18") and no lift. Should have no rub or mod.

 

I went with the MR304 18in +25 and really like them

 

Here is a picture of my old truck with 18” NV305’s, I didn’t keep it long enough to upgrade to better tires.

 

Method NV 18x9 +25 offset on 295/70/18 Toyo AT 2 Extremes.

 

I just picked up a set of four TRD Pro wheels for $650 off Craigslist, 2,000 miles on them. Guess I'll be rocking these soon. Thanks for all the info and pics though.

 

not a tundra but I do have one but no methods on it but FJ does have Methods

 

Ok, so now that I have new TRD Pro wheels. Gonna’ try to figure out largest tires I can put on without modifications as with only 700 miles on the truck I would like to keep the two year Toyota care and factory warranty, for now. Any suggestions on largest size and best tires for a little more aggressive profile? I don’t do serious off-roading but do get off road a few times a year.

 

I just got Method 17s and 315 35s. Pretty sweet.

 

Method 305NV 20x9 +25 offset w/275/60/20 Nitto Grapplers and 5100s on front middle setting.

 

Methods 701s 17s on 35s

 

17” Method 312’s with 35x12.5 Toyos.

 

Lol

 

Went with the stock tires for now. Will lift and go to more aggressive tires eventually.

 

I just mounted the new Method 705 in titanium on my 2014. 275/70R18 K02

 

312’s with 315/70/17 Wildpeaks

 

My ‘21 with 305 NV Machined and my ‘14 304 Double Standard.

 

17x8.5 0 offset 314s