My 2015 TRD PRO

I picked up my PRO July 2015, the last black one in the KC region, I got called in early when it came off the truck as it was unclaimed so it had to be mine.
Vehicle:
2015 Tundra TRD PRO aka 'TRDREX"

Wheels & Tires:
TRD PRO Wheels wrapped with 35x12.5R18

Suspension:
Coachbuilder Front Shims & +3 rear shackles
Factory PRO Suspension

Armor:
Magnum ICI Front
Go Rhino BR20 rear

Exterior:
Tundra Bed mat
Toyota Bed Extener
Roll-up bed cover
Rear window deflector
Shorty Antenna

Exhaust/Intake:
TRD Air filter
TRD dual Exhaust
Flowermaster Outlaw 10 Series Muffler

Lights:
24 in Led light bar installed on bumper
40 in LED light bar installed behind grille
Led fog lights
LED pods in BR20 rear bumper

Misc:
Painted TRD Exhaust pipes
Toyota Weathertech floormats
Custom Dash coloring
Dash Cam
Directed Smart Start system(Cell phone remote start with GPS)

Things to Come:
Spyder headlights
Upper control arm upgrades
Frame Sliders
Currently Fabricating Custom Expedtion bed rack
TEPUI Tent
McNeil racing front fenders
Snorkel kit

 

Welcome, I've been thinking about the same rear bumper.

 

I like it, looks and fits good, i got this in January, and at the time it wasn't supposed to fit Tundras with factory towing, but it does indeed fit(with slight modification), they said they were making a production change to them.

 

Welcome, also from KC. (Out by KCI/MCI)

 

Yea i'm out of the Wichita area, but i make it up to KC to the Toyota center for my occasional training update classes.

 

Thanks, that's good to know. I do have the tow package. I also have blind spot monitoring, the sensors mount in the bumper end caps. I'm hoping I might be able to mount the sensors in the step cut-outs of the br20 and put a plastic cover over the sensors to protect 'em. Got any more photos of your bumper? It's hard to find good photos of that bumper on a Tundra. I think it looks great on your truck.

 

I post some more on here shortly. It does have the cut outs for sonar sensors but blind spot may be tricky, it does not like any metal in front of it all, and they are kinda pain to re-calibrate. idk if the cut outs in the bumper will give the sensor enough room to read surroundings.

 

Sounds like you're familiar with the BSM so thank you for your insight.

 

yea we deal with it alot here in the shop, its on most of our vehicles now, and any car with BSM that is in a wreck or goes to the body shop, they have to bring it to us to calibrate it after repairs, sometimes even if its just unplugged.

 

BSM won't function with metal in front of it as that is what they are scanning for. Also, moving them isn't advised as the calibration is too specific. Its a pain when one corner of a vehicle has been hit and nearly impossible of the entire rear end was hit.

 

So sexy, so jelly!

 

Ahh I hate you

The one that got away. My Tacoma was blacked out and was hoping I could get the black TRD PRO but I was a year too late.

You are a lucky man, take good care of her sir!

 

@trdlife That is really a nice looking set up! are you into serious offroading? I am curious, if you happen to know, what those bumpers weigh?

 

Welcome from CO

 

I would like to get into it more, its finding time is my issue. Also not too many dedicated off-road areas around here, other than finding the farm roads outside of town.

The front bumper i say weighed the same as the stock front bumper, after install i noticed no difference in MPG or power loss, as for the rear bumper it seemed alot heavier it seemed like it sagged the rear but i compared ride heights to another and it was the same.

 

Been busy this week. Installed spot light on the Rear bumper. They are wired in with the rear cargo lights and doors. Then got my self some awesome coachbuilder +3 shackles and shins. Then topped off with some new 35s upgraded from 33

 

What tires are those?

 

Looking awesome. If you add red TRD PRO inserts on the bed it would look even more bad ass!

 

They are chaparral m/t tires I found them at a local shop here for like $700 so I said fuck it worth a shot

 

I had them in there for a little while and didn't like the way they looked. I'd like to find some that are made the same as the tailgate emblem

 

looks bitchin..dem 35"s !

 

Had some slow times at work lately, so I decided to do a few basic and cheap mods to the PRO. Decided to pull the dash out and do some vinyl wrapping, just dont like the chrome interior pieces. This also game me a chance to finally hide my radar detector cord and I installed a dash cam too and hid wires. Then i decided to continue my blackout campaign and pulled the tailpipes off and painted them as well.

 

The interior wrap looks great. Was it hard to do without any creases?

 

Im a Tech, so taking the interior apart and getting it set up was easy and fast, but as far as wrapping goes this was my first true go at anything this style, and for me it was a pain lol. lay it on looking good, got the heat gun to it, going over a curve looking good, then bam crease and disaster. overall for my first attempt its ok, I like it. If you have patience it will go alot smoother and final product will be better. I do plan on redoing tis at some point. I will take it all out and either have out tint guys do it, or ill hydro dip it.

 

Nice!! Looks great!

 

Did you measure before you installed the shim and shackle? Just curious as to how much actual lift. Truck looks good!

 

looks great