1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Toyota Tundra 2016 bracket bolt welded - can not remove to install trailer hitch

Discussion in '2.5 Gen Tundras (2014-2021)' started by Arsenal1508, Sep 14, 2019.

  1. Sep 14, 2019 at 6:24 PM
    #1
    Arsenal1508

    Arsenal1508 [OP] New Member

    Joined:
    Sep 14, 2019
    Member:
    #36131
    Messages:
    2
    Hello,

    Does anyone know if this is normal for Toyota to weld the bracket that you need to remove for installing a trailer hitch? I was able to get the top bolts out, but the side bolts are welded. That's insane. Or am insane? Anyone, any recommendations to remove both these bolts will be highly appreciated. See picture below.

    [​IMG]

    Thank you
     
    Tundyfundy likes this.
  2. Sep 14, 2019 at 8:00 PM
    #2
    Scuba

    Scuba Sober member

    Joined:
    Oct 13, 2018
    Member:
    #20508
    Messages:
    1,244
    Gender:
    Male
    Austin, Tx.
    Vehicle:
    2012 Texas Edition CM.
    I see the nuts are welded to the bracket but unless I’m missing something the bolt should still be able to spin and come out.
     
  3. Sep 14, 2019 at 8:19 PM
    #3
    Tierhog

    Tierhog SIG-AHOLIC

    Joined:
    Feb 7, 2018
    Member:
    #12731
    Messages:
    1,200
    Gender:
    Male
    First Name:
    Steve
    Florida
    Vehicle:
    2016 Tundra Crewmax Limited 4WD
    Mostly stock/TRD accessories/Morimoto XBs
    Loc-Tite would have been sufficient. Run the VIN and see if the truck came with a tow package. Looks like somebody bought the hitch, bolted it up, and welded/painted it. Very clean work but a bit too permanent and overkill for me.

    I could be wrong, but I've never heard of this being factory welded.
     
  4. Sep 14, 2019 at 8:22 PM
    #4
    AZTundra

    AZTundra No Longer a New Member

    Joined:
    Feb 13, 2018
    Member:
    #12894
    Messages:
    4,162
    Gender:
    Male
    First Name:
    Paul
    Phoenix, AZ
    Vehicle:
    2017 White Crewmax Limited 5.7 FFV
    Magnuson Supercharger, TRD Goodies (Pro Suspension, Pro Grille, Exhaust, CAI, Rear Sway Bar, Oil Cap). Weather Tech Floormats, BakFlip MX4, Spray In Bedliner, AMP Research Bed Extender and Bed Step, Side Steps, B&W Adjustable Drop Hitch, AJT Designs Battery Hold Down, SDHQ Sliders.
    The nuts are welded to the bracket, but that doesn't stop you from removing the bolts and taking the bracket off.
     
    TheBeast and NewImprovedRon like this.
  5. Sep 14, 2019 at 8:28 PM
    #5
    Rubberdown

    Rubberdown Spilling my guts here.

    Joined:
    Jan 23, 2019
    Member:
    #24972
    Messages:
    1,231
    Houston, TX
    Look on other side of bolt and use socket to remove bolt. Welds keep you from having to hold nut.

    I did this on an old tundra. It’s easier with the whole bumper off. The danged hitch replaces a big piece of structure so you might as well take it all apart.
     
    Pudge and too tall like this.
  6. Sep 16, 2019 at 1:28 PM
    #6
    Tundyfundy

    Tundyfundy Petunia The Tundra, and her sidekick Colbie

    Joined:
    May 5, 2017
    Member:
    #7567
    Messages:
    2,699
    Gender:
    Male
    Southern California
    Vehicle:
    Magnetic Grey DC SR5 4x4 2016
    SUSPENSION: Bilstein 6112 coilover (1.9") w/ Powder Coated Springs and Spring Perch (TRD Red), JBA Upper Control Arms, Bilstein 5160's w/Billet Aluminium Reservoir Brackets, +2 Coachbuilder Shackles, Diff Drop Kit, Carrier Bearing Drop Kit, Brakeline Extensions, ABS Extension, Poly Bushings for Leafs, Coachbuilder Shims (2 Each Side), Coachbuilder Bumpstop Extensions, TRD Rear Sway Bar, TRD Front Sway Bar, Air Lift 5000 airbags w jounce bumpers, Daystar Airbag Cradles WHEELS AND TIRES: BF Goodrich KO2's 275/70/r18, BORA wheel spacers 1.25", TRD Wheel Caps,TRD Valve Stem Caps, Spare Tire Lock PERFORMANCE: Bullydog GT Tuner(Performance Tune), TRD Intake, TRD Dual Exhaust (with Modified Exhaust Hangers for Levelling Tail Pipe),TRD Brake Pads, TRD Oil Cap (US), TRD Radiator Cap, TRD Oil Filter, Optima Yellow Top Battery,GP Battery Distribution Blocks, StopTech Slotted Cryo Treated Rotors, Goodridge G-Stop Steel Braided Brake Line Kit PROTECTION: PNP Engineering Type 4 Rock Sliders (With Full Dimple Plate) ,ADD Stealth Fighter Rear Bumper w Red/Blk Shackles and Custom Stomp Pad, TRD Skid Plate with ReadyLift Spacer Kit, Victory 4x4 LCA Skid Plates, JOMAX ABS Sensor Armor, Rear Diff Breather Mod, ARK splash guards INTERIOR: Husky Liners X-Act (Front and Full Coverage Rear and Front Weather Beater Trans Hump), Interior LED Bulbs, WheelSkins Genuine Leather Steering Wheel Cover(EuroPerf), Clazzio Genuine Leather Seat Covers(BLK/DRK GRYwith custom stitching and embroidered headrests), Clazzio Seat Heaters (Front and Rear), Entune Startup Screen MOD, Entune Off Screen Mod, Tinted Windows with Windshield Visor, AJT Key Fobs,Eagle Claws Floor Mat Clips, Bodyglove Visor Organizer,Custom Door Cup Inserts, Glass Break Sensor,AJT Radio Knobs, Custom Dior Cup Inserts EXTERIOR: Full Debadge, LED Brake Light Bulbs, LED Rear Turns, LED Reverse, LED Plate Lights, LED Cargo Lights, LED Third Brake Lights, LED Front Marker Lights, LED Fog Light Bulbs, Lamin-X Fog Light Covers (Amber),2018 OEM LED Headlights, iHacker harness, VLED Universal Puddle Lights, VLED Interior Footwell Lighting (Front and Rear),VLED Extreme Amber Fornt Turns, NSV Knight Rider Light bar, Baja Designs Sport Squadron Pods in Rear Bumper (Driving/wide), Painted Red Tow-hooks, Bed Rail System, Blind Spot Mirrors, Hitch-safe, Tail-gate lock, EAG Raptor Grille, Custom Grille Badge,Full Vinyl Wrap (Matte Black/Matte Pine Green Mettalic), Charvonia Designs Tie Bed Tie-Downs, Bull Ring Bed Rail Anchors, Line-X, Tundra Bed Mat, Bakflip F1 Bed Cover SOUND: Noico 80Mil Sound Deadening and Noico 170 Mil Thermal Insulation (All 4 Doors, Roof, Floors, Rear Panel, Dash). Hertz Uno K170's Component Speakers (Front Doors with Upgraded Sail Panels), Hertz Uno K170 Coaxial Speakers (Rear Doors), JBL C1-075ct Tweeters (Total 4) in Side Dash and Center Speaker, JBL Stadium 5 Amp w/Remote Bass Adjustment Knob and Amp Rack, 12" Infinity Reference Subwoofer in Custom Enclosure w/ “TUNDRA” Logo, Fast Rings Foam Speaker Rings System(4 Doors), Fix 86 DSP
    Looks like you tried to get off those welded nuts for a while! :frusty: The other side of the frame is where you'll find the bolts that turn.
     
  7. Sep 16, 2019 at 1:32 PM
    #7
    Black Wolf

    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,012
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
  8. Sep 16, 2019 at 1:34 PM
    #8
    Tundyfundy

    Tundyfundy Petunia The Tundra, and her sidekick Colbie

    Joined:
    May 5, 2017
    Member:
    #7567
    Messages:
    2,699
    Gender:
    Male
    Southern California
    Vehicle:
    Magnetic Grey DC SR5 4x4 2016
    SUSPENSION: Bilstein 6112 coilover (1.9") w/ Powder Coated Springs and Spring Perch (TRD Red), JBA Upper Control Arms, Bilstein 5160's w/Billet Aluminium Reservoir Brackets, +2 Coachbuilder Shackles, Diff Drop Kit, Carrier Bearing Drop Kit, Brakeline Extensions, ABS Extension, Poly Bushings for Leafs, Coachbuilder Shims (2 Each Side), Coachbuilder Bumpstop Extensions, TRD Rear Sway Bar, TRD Front Sway Bar, Air Lift 5000 airbags w jounce bumpers, Daystar Airbag Cradles WHEELS AND TIRES: BF Goodrich KO2's 275/70/r18, BORA wheel spacers 1.25", TRD Wheel Caps,TRD Valve Stem Caps, Spare Tire Lock PERFORMANCE: Bullydog GT Tuner(Performance Tune), TRD Intake, TRD Dual Exhaust (with Modified Exhaust Hangers for Levelling Tail Pipe),TRD Brake Pads, TRD Oil Cap (US), TRD Radiator Cap, TRD Oil Filter, Optima Yellow Top Battery,GP Battery Distribution Blocks, StopTech Slotted Cryo Treated Rotors, Goodridge G-Stop Steel Braided Brake Line Kit PROTECTION: PNP Engineering Type 4 Rock Sliders (With Full Dimple Plate) ,ADD Stealth Fighter Rear Bumper w Red/Blk Shackles and Custom Stomp Pad, TRD Skid Plate with ReadyLift Spacer Kit, Victory 4x4 LCA Skid Plates, JOMAX ABS Sensor Armor, Rear Diff Breather Mod, ARK splash guards INTERIOR: Husky Liners X-Act (Front and Full Coverage Rear and Front Weather Beater Trans Hump), Interior LED Bulbs, WheelSkins Genuine Leather Steering Wheel Cover(EuroPerf), Clazzio Genuine Leather Seat Covers(BLK/DRK GRYwith custom stitching and embroidered headrests), Clazzio Seat Heaters (Front and Rear), Entune Startup Screen MOD, Entune Off Screen Mod, Tinted Windows with Windshield Visor, AJT Key Fobs,Eagle Claws Floor Mat Clips, Bodyglove Visor Organizer,Custom Door Cup Inserts, Glass Break Sensor,AJT Radio Knobs, Custom Dior Cup Inserts EXTERIOR: Full Debadge, LED Brake Light Bulbs, LED Rear Turns, LED Reverse, LED Plate Lights, LED Cargo Lights, LED Third Brake Lights, LED Front Marker Lights, LED Fog Light Bulbs, Lamin-X Fog Light Covers (Amber),2018 OEM LED Headlights, iHacker harness, VLED Universal Puddle Lights, VLED Interior Footwell Lighting (Front and Rear),VLED Extreme Amber Fornt Turns, NSV Knight Rider Light bar, Baja Designs Sport Squadron Pods in Rear Bumper (Driving/wide), Painted Red Tow-hooks, Bed Rail System, Blind Spot Mirrors, Hitch-safe, Tail-gate lock, EAG Raptor Grille, Custom Grille Badge,Full Vinyl Wrap (Matte Black/Matte Pine Green Mettalic), Charvonia Designs Tie Bed Tie-Downs, Bull Ring Bed Rail Anchors, Line-X, Tundra Bed Mat, Bakflip F1 Bed Cover SOUND: Noico 80Mil Sound Deadening and Noico 170 Mil Thermal Insulation (All 4 Doors, Roof, Floors, Rear Panel, Dash). Hertz Uno K170's Component Speakers (Front Doors with Upgraded Sail Panels), Hertz Uno K170 Coaxial Speakers (Rear Doors), JBL C1-075ct Tweeters (Total 4) in Side Dash and Center Speaker, JBL Stadium 5 Amp w/Remote Bass Adjustment Knob and Amp Rack, 12" Infinity Reference Subwoofer in Custom Enclosure w/ “TUNDRA” Logo, Fast Rings Foam Speaker Rings System(4 Doors), Fix 86 DSP
    I was wondering who was going to address the elephant in the room. LMAO


    PS: those bolts look wonky. Weird angles like one is bent. Maybe just the camera angle.
     
    Black Wolf[QUOTED] likes this.
  9. Sep 16, 2019 at 1:36 PM
    #9
    RLHULK

    RLHULK Too many gamma rays in all that BBQ smoke.

    Joined:
    Nov 3, 2015
    Member:
    #2054
    Messages:
    5,549
    Gender:
    Male
    First Name:
    Rich
    Oklahoma, Toyota seat trim durability tester
    Vehicle:
    2022 Silverado LT.
    Still rolling stock baby....
    Yup nuts are welded to frame
     
    Black Wolf and Tundyfundy like this.
  10. Sep 16, 2019 at 1:37 PM
    #10
    RLHULK

    RLHULK Too many gamma rays in all that BBQ smoke.

    Joined:
    Nov 3, 2015
    Member:
    #2054
    Messages:
    5,549
    Gender:
    Male
    First Name:
    Rich
    Oklahoma, Toyota seat trim durability tester
    Vehicle:
    2022 Silverado LT.
    Still rolling stock baby....
    Bolts are self tapping I do believe
     
    Migraine and Tundyfundy[QUOTED] like this.
  11. Sep 16, 2019 at 5:17 PM
    #11
    Arsenal1508

    Arsenal1508 [OP] New Member

    Joined:
    Sep 14, 2019
    Member:
    #36131
    Messages:
    2
    Got them off
    Like everyone said, got it from the other side.

    Thank you
     
    Migraine, Pinay, Tundyfundy and 3 others like this.
  12. Sep 16, 2019 at 5:27 PM
    #12
    Black Wolf

    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,012
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Kuul!. Why are you removing the hitch anyways now that the bolts are off?
     
  13. Sep 16, 2019 at 6:03 PM
    #13
    Black Wolf

    Black Wolf Bigfoot Hunter, Sasquatch too, but not Yeti

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    40,012
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2022 Nissan Frontier SV 4X4
    TuwaPro rack, Z1 Offroad stuff, NISMO suspension stuff, FlowmasterFX Extreme exhaust, AIS, OVS, J&L can, other goodies on the way
    Nevermind... forgot you are putting a new hitch on.
     
  14. Sep 16, 2019 at 10:44 PM
    #14
    Hunterdan

    Hunterdan New Member

    Joined:
    Aug 2, 2019
    Member:
    #34034
    Messages:
    84
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 Inferno DC SR5
    OEM TRD led lights, TRD exhaust, s&b intake
    Bolts are tapered to make installing them easier, kind of like self aligning.
     
    NewImprovedRon likes this.

Products Discussed in

To Top